STEPPERONLINE 1.5KW 220V 2HP 7A VFD Variable Frequency Drive Inverter
ControllerUSD $81.69
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Store Categories
Store Categories This VFD with power 2HP(1.5KW) and single phase 220V input voltage. The H100 series is General Variable Frequency Drive(VFD), they are widely used in application of: Textile machines, Packaging machines, Engraving machines, Printing machines, Food machinery, Woodworking machinery, Pump fans, Ceramic machinery, Solar pumps and others. This product has V/F control, speed sensor less vector control, etc., suitable for asynchronous motors, permanent magnet synchronous motors, single-phase motors. H100 series inverter have compact structure, convenient and flexible installation,reasonable heat dissipation design to ensure product reliability, rich keyboards and multi-function cards to choose, flexible functions. Package Content 1 x 1.5KW Variable Frequency Drive Inverter 1 x English Manual Key Specification Rated Input Voltage: 1-Phase 200~240VAC Allowed Input Voltage: 180~260VAC Input Frequency: 50/60Hz(+/-5%) Input Current: 14.0A Power: 2HP(1.5KW) Output Current: 7.0A Output Voltage: 0~Rated Input Voltage Output Frequency: 0~1000Hz Output Capacity: 150% Rated Current 60s, 180% Rated Current 2s Main circuit and function card Power terminal wiring instructions For 220V class inverter, use class 3 grounding method(grounding resistance: less than 100Ω). Use special grounding terminal for grounding. Do not use screws for grounding in the box. Note: Grounding steps (1) Determine the location of the ground terminal. (2) Connect the ground-wire to the ground terminal and make sure that the screws are tight Main circuit terminal description Please implement the wiring in accordance with the regulations of electrician regulations to ensure safety When selection of the wire diameter specification ● It is best to use isolated wires or conduits for power wiring, and ground the isolation layer or conduits at both ends. ● Be sure to install the air disconnect switch NFB between the power supply and the input terminals(R / L1, S / L2, T / L2) ● Do not connect the AC power supply to the output terminal (U V W) of the inverter. ● The output wiring must not touch the metal shell of the inverter, in case of a short circuit to ground. ● Do not use phase shift capacitors, LC / RC noise filters and other components at the output of the inverter. ● The main circuit wiring of the inverter must be far away from other control equipment. ● When the wiring between the inverter and the motor exceeds 15 meters (220V level),(380V level 30 meters), a high dV / dT will be generated inside the motor coil, which will produce interlayer insulation of the motor then damaged, please use a special motor for the inverter or install a reactor on the inverter side. Keyboard Features
Store Categories This VFD with power 2HP(1.5KW) and single phase 220V input voltage. The H100 series is General Variable Frequency Drive(VFD), they are widely used in application of: Textile machines, Packaging machines, Engraving machines, Printing machines, Food machinery, Woodworking machinery, Pump fans, Ceramic machinery, Solar pumps and others. This product has V/F control, speed sensor less vector control, etc., suitable for asynchronous motors, permanent magnet synchronous motors, single-phase motors. H100 series inverter have compact structure, convenient and flexible installation,reasonable heat dissipation design to ensure product reliability, rich keyboards and multi-function cards to choose, flexible functions. Package Content 1 x 1.5KW Variable Frequency Drive Inverter 1 x English Manual Key Specification Rated Input Voltage: 1-Phase 200~240VAC Allowed Input Voltage: 180~260VAC Input Frequency: 50/60Hz(+/-5%) Input Current: 14.0A Power: 2HP(1.5KW) Output Current: 7.0A Output Voltage: 0~Rated Input Voltage Output Frequency: 0~1000Hz Output Capacity: 150% Rated Current 60s, 180% Rated Current 2s Main circuit and function card Power terminal wiring instructions For 220V class inverter, use class 3 grounding method(grounding resistance: less than 100Ω). Use special grounding terminal for grounding. Do not use screws for grounding in the box. Note: Grounding steps (1) Determine the location of the ground terminal. (2) Connect the ground-wire to the ground terminal and make sure that the screws are tight Main circuit terminal description Please implement the wiring in accordance with the regulations of electrician regulations to ensure safety When selection of the wire diameter specification ● It is best to use isolated wires or conduits for power wiring, and ground the isolation layer or conduits at both ends. ● Be sure to install the air disconnect switch NFB between the power supply and the input terminals(R / L1, S / L2, T / L2) ● Do not connect the AC power supply to the output terminal (U V W) of the inverter. ● The output wiring must not touch the metal shell of the inverter, in case of a short circuit to ground. ● Do not use phase shift capacitors, LC / RC noise filters and other components at the output of the inverter. ● The main circuit wiring of the inverter must be far away from other control equipment. ● When the wiring between the inverter and the motor exceeds 15 meters (220V level),(380V level 30 meters), a high dV / dT will be generated inside the motor coil, which will produce interlayer insulation of the motor then damaged, please use a special motor for the inverter or install a reactor on the inverter side. Keyboard Features
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
