SI FANG 2'' 3'' Mini Orbital Air Sander High Speed Random Orbital Air

▲ High quality professional Air Random Orbital Sander with 2 inch and 3 inch sanding pad ，it is a Good Mini Detail Sander Polisher For Auto Body.

▲ High stability, low vibration rate and low energy consumption, 15000 Rpm. And it is easy to operate mini air sander.

▲ The Hand Air Sander Has Small Size, Light Weight, Low Vibration, Easy To Take Grip Operation，different Type Of Sandpaper Can Be Installed With Different Type Of Disc , Which Is Powerful And Suitable For Polishing Small Areas And Refinishing Paint.

▲ High efficiency, High technology. SI FANG air polisher adopts eccentric double-rotation polishing method to make the polishing effect more uniform and smooth.

▲ Ideal for spot sanding focus areas, removing solder joints and rust spots on metal products, deburring furniture and woodwork, mold manufacturing, polishing automotive and detailing work,etc.

Product Description
About SI FANG:
At SI FANG, we aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle.
We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products.
If you have any questions please contact me. I will reply within 24 hours and try my best to assist you.
Specifications: Pad Size: 2" and 3" Orbit Diameter: 3mm Free Speed: 15,000RPM Air Consumption: 4 CFM Air Inlet: 1/4" Air Pressure: 90 PSI Exhaust: Rear End Weight: 920g Light weight and high base, single hand operation The rubber sleeve handle can be used for a long time Eccentric double-rotation polishing method to make the polishing effect more uniform and smooth Different type of sandpaper can be installed with different type of disc The small design makes it perfect for reaching smaller areas and tighter contours with less user fatigue. New version, high strength, wear resistant, long service life
Product Feature
Press-to-Switch Design
Designed with comfortable pressing switch which is easy to use with higher efficiency.
Exhaust and Noise Elimination Design
With the exhaust and noise elimination design,it creates a quiter working environment with less noise.
There is a dust net inside, which can effectively prevent foreign bodies from entering the body
Air Speeding Regulator Valve
The working speed and air pressure can be adjusted according to detailed working requirement.
Widely used
Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
How to Replace the Sanding Pad?
STEP 1
Find the lock hole
STEP 2
Insert the fixed pin into the lock hole and keep the pin still
STEP 3
Turn right and screw off the sanding pad
STEP 4
Put on the new sanding pad and screw tight. Replacement complete!
inRoutine maintenance for 2" and 3" random orbital air sander Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool. Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air. Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended. Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance. Do release the water out of the air compressor and air hose after an operation. Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.
Instruction manual for 2" and 3" random orbital air sander Please check off all tightening parts of the tools to be in good condition before operation. Working pressure to be 6.3 kg/cm3 (90PSI) at operation. Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet The best hand stress on the tool is from 5Kg to 7Kg when operation. Release the air supply when replacing the sandpaper or the backing pad. Wear protection glasses, eye protector, dust mask and gloves at operation. Have a short break in every 30minutes to avoid any possible injury due to tiredness. Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage. Do not touch the rotating part of the tool with your hand or your body at operation. Start your sanding job after you fit the sanding pad flat on the surface you are working on. Please refer to Figure 2.

Returns Accepted for this item if it's within 30 Days