SCHMIDT , 3.5 CUFT, BLAST AND VACUUM RECOVERY STSTEM ( USED LOW HOUR UNIT
)USD $26,000.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
For Sale Qty 1 Used Schmidt 3.5 CUFT Blast and Vacuum Recovery System. Unit has low hours , unit is in like new condition .
Model year 2014
Approximate price for Base unit new is Around $42,000 +
No hoses or attachments.
Unit was used for 1 project removing scale from steel plate used for approximately 2 months.
Unit has been stored inside ever since project was completed.
This is a very nice unit, very clean at almost half the cost of new . BASIC MACHINE SPECIFICATIONS AND INFO FOUND ON THE INTERNET BELOW The Schmidt® BRS is designed to maximize the use of a wide range of recyclable abrasives, including steel grit, to remove coatings and corrosion when cleaning steel or concrete surfaces. Blast and recover simultaneously, or blast and then vacuum abrasive independently. Eliminate dust clouds, poor visibility and costly, time-consuming cleanup. Ideal for sensitive job sites, indoor blasting, building restoration, lead or asbestos abatement, bridge and road maintenance, barge and ship cleaning, and more. The BRS is designed to blast and vacuum recover abrasive media for reuse. These systems can blast and vacuum abrasive independently, or blast and vacuum at the same time (closed circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered using the system’s vacuum. Small particles are carried by the vacuum air stream through the reclaimer into the dust collector. The reusable abrasive drops to the bottom of the reclaim hopper. Large particles (paint chips, etc.) are separated out by an abrasive screen. Abrasive is reloaded from the reclaim hopper for reuse when the blast vessel is depressurized. • Blast where open-air blasting is prohibited, or is not possible or practical • Portable or skid-mounted 2.0, 3.5 and 6.5 cu. ft. models • Pneumatic or optional electric remote controls • Blast pressure regulator with bypass piping allows blasting at lower pressures • Urethane eductor (pneumatic vacuum pump) with 150, 225, 350 or 440 CFM nozzle • Cyclonic dust separator/media reclaimer • Dust collector (dry or dry-HEPA) with automatic pulse jet to prevent clogging • Easy, quick-open hatches for access to cartridges and filters • Optional differential pressure gauge (dust collector) • Moisture separator and media vibrator for smooth, even flow of abrasive • TVII™ abrasive metering valve (urethane sleeve) • Tungsten Carbide TVII sleeves available • Optional adjustable air wash for improved media cleaning • Optional remote abrasive cutoff for cleaner start/stop • Optional electric vacuum available FEATURES Maximum working pressure (BRS): 150 psig at 250°F Minimum metal temperature (BRS): -20°F at 150 psig Blast hose size (BRS): Up to 1 1/2” SPECIFICATIONS
PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR ALL SHIPPING, SKIDDING/CRATING , COSTS AND ALL APPLICABLE TAXES. MACHINE WILL MOST LIKELY NEED TO BE SHIPPED ON AIR RIDE FLATBED .
I WILL LOAD ON FLATBED AT NO ADDITIONAL COST. Mechanical Specifications:
Shipping Weight: approx.1,600 lbs.
Ships from Rockford IL
Machine may be seen by appointment only .
Please send me any questions you may have or ring me 8157421665
Machine ships only to the lower 48 states USA at additional expense to the purchaser. > Note: please make sure machine is still available as it is being advertised in other places.
WE HAVE A FORKLIFT TO LOAD WITH AT NO CHARGE IF JUST SETTING ON FLATBED TRAILER or TRUCK. STANDARD TERMS AND CONDITIONS
NET DUE AT TIME OF ORDER . PLEASE NOTE:
G&S MACHINERY INC DOES NOT OFFER ANY TYPE OF WARRANTY; THE ONLY WARRANTIES THAT WOULD APPLY FALL UPON THE MANUFACTURER, THE SAME WOULD ALSO BE TRUE WITH ANY TYPE OF LIABILITY. G&S IS ONLY A DISTRIBUTOR IN THIS SALE, AND SHALL BE HELD HARMLESS OF ANY TYPE OF LEGAL ACTION CAUSED BY OR DUE TO DISTRIBUTION OR SALE OF THIS PRODUCT (I.E. INDIVIDUAL GETTING HURT OR MALFUNCTION OF EQUIPMENT RESULTING IN LOSS OF TIME OR MONEY). SELLER SHALL HAVE NO LIABILITY TO BUYER FOR LOST PROFITS OR FOR SPECIAL CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES OF ANY KIND, WHETHER ARISING IN CONTRACT, TORT, AND PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POTENTIAL DAMAGES IN ADVANCE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY DAMAGES WHATSOEVER.
UNLESS OTHERWISE STATED PRICING DOES NOT INCLUDE FREIGHT, OR TAXES OF ANY KIND.
PURCHASER IS RESPONSIBLE TO VERIFY EQUIPMENT AND SPECIFICATION OF EQUIPMENT TO VERIFY EQUIPMENT WILL FIT CUSTOMERS NEEDS.
PROPOSAL DOES NOT ALLOW FOR STORAGE OR REHANDLING OF EQUIPMENT, ADDITIONAL COST MAY BE INCURRED IF SUCH MATTERS ARISE.
SELLERS ACCEPTANCE OF BUYER’S ORDER IS EXPRESSLY CONDITIONAL UPON BUYERS AGREEMENT TO THESE TERMS AND CONDITIONS. ALL INCONSITANT OR ADDITIONAL TERMS, MODIFICATIONS, OR CHANGES ARE OF THIS AGREEMENT UNLESS SELLER AGREES TO SUCH TERMS IN WRITING.
SELLER SHALL NOT BE LIABLE FOR DELIVERY DELAYS BEYOND ITS CONTROL, INCLUDING DELAYS CAUSED BY ITS SUPPLIERS. ALL DELIVERY DATES ARE MERELY GOOD FAITH ESTIMATES. ALL SHIPMENTS ARE FOR SELLERS DISTRIBUTION POINT AND THE RISK OF LOSS PASSES TO BUYER UPON DELIVERY.
SELLER DOES NOT WARRANT THE PRODUCTS WHICH IT DOES NOT MANUFACTURE RATHER; ALL WARRANTIES FOR THESE PRODUCTS ARE SUPPLIED BY THE MANUFACTURER. SELLER EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SELLER SHALL BE ENTITLED TO REIMBURSMENT OF COLLECTION COSTS AND REASONABLE ATTORNEY FEES INCURRED TO ENFORCE ITS RIGHTS UNDER THIS AGREEMENT.
THESE TERMS AND CONDITIONS AND ANY OTHER WRITING SIGNED BY SELLER CONSTITUTE THE ENTIRE AGREEMENT, AND MAY NOT BE MODIFIED OTHER THAN BY WRITTEN DOCUMENTATION SIGNED BY SELLER. PLEASE NOTE:
INFORMATION IS ACCURATE AND CORRECT TO THE BEST OF MY KNOWLEDGE.
G&S MACHINERY HAS THE RIGHT TO CHANGE PRICING OR CANCEL SALE AT ANY TIME AS ITEM IS ALSO BEING ADVERTISED OUTSIDE OF EBAY.
RESPEECFULLY
Bryan
Model year 2014
Approximate price for Base unit new is Around $42,000 +
No hoses or attachments.
Unit was used for 1 project removing scale from steel plate used for approximately 2 months.
Unit has been stored inside ever since project was completed.
This is a very nice unit, very clean at almost half the cost of new . BASIC MACHINE SPECIFICATIONS AND INFO FOUND ON THE INTERNET BELOW The Schmidt® BRS is designed to maximize the use of a wide range of recyclable abrasives, including steel grit, to remove coatings and corrosion when cleaning steel or concrete surfaces. Blast and recover simultaneously, or blast and then vacuum abrasive independently. Eliminate dust clouds, poor visibility and costly, time-consuming cleanup. Ideal for sensitive job sites, indoor blasting, building restoration, lead or asbestos abatement, bridge and road maintenance, barge and ship cleaning, and more. The BRS is designed to blast and vacuum recover abrasive media for reuse. These systems can blast and vacuum abrasive independently, or blast and vacuum at the same time (closed circuit). Abrasive is contained in the pressure vessel for blasting. After or during blast operation, the abrasive is recovered using the system’s vacuum. Small particles are carried by the vacuum air stream through the reclaimer into the dust collector. The reusable abrasive drops to the bottom of the reclaim hopper. Large particles (paint chips, etc.) are separated out by an abrasive screen. Abrasive is reloaded from the reclaim hopper for reuse when the blast vessel is depressurized. • Blast where open-air blasting is prohibited, or is not possible or practical • Portable or skid-mounted 2.0, 3.5 and 6.5 cu. ft. models • Pneumatic or optional electric remote controls • Blast pressure regulator with bypass piping allows blasting at lower pressures • Urethane eductor (pneumatic vacuum pump) with 150, 225, 350 or 440 CFM nozzle • Cyclonic dust separator/media reclaimer • Dust collector (dry or dry-HEPA) with automatic pulse jet to prevent clogging • Easy, quick-open hatches for access to cartridges and filters • Optional differential pressure gauge (dust collector) • Moisture separator and media vibrator for smooth, even flow of abrasive • TVII™ abrasive metering valve (urethane sleeve) • Tungsten Carbide TVII sleeves available • Optional adjustable air wash for improved media cleaning • Optional remote abrasive cutoff for cleaner start/stop • Optional electric vacuum available FEATURES Maximum working pressure (BRS): 150 psig at 250°F Minimum metal temperature (BRS): -20°F at 150 psig Blast hose size (BRS): Up to 1 1/2” SPECIFICATIONS
PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR ALL SHIPPING, SKIDDING/CRATING , COSTS AND ALL APPLICABLE TAXES. MACHINE WILL MOST LIKELY NEED TO BE SHIPPED ON AIR RIDE FLATBED .
I WILL LOAD ON FLATBED AT NO ADDITIONAL COST. Mechanical Specifications:
Shipping Weight: approx.1,600 lbs.
Ships from Rockford IL
Machine may be seen by appointment only .
Please send me any questions you may have or ring me 8157421665
Machine ships only to the lower 48 states USA at additional expense to the purchaser. > Note: please make sure machine is still available as it is being advertised in other places.
WE HAVE A FORKLIFT TO LOAD WITH AT NO CHARGE IF JUST SETTING ON FLATBED TRAILER or TRUCK. STANDARD TERMS AND CONDITIONS
NET DUE AT TIME OF ORDER . PLEASE NOTE:
G&S MACHINERY INC DOES NOT OFFER ANY TYPE OF WARRANTY; THE ONLY WARRANTIES THAT WOULD APPLY FALL UPON THE MANUFACTURER, THE SAME WOULD ALSO BE TRUE WITH ANY TYPE OF LIABILITY. G&S IS ONLY A DISTRIBUTOR IN THIS SALE, AND SHALL BE HELD HARMLESS OF ANY TYPE OF LEGAL ACTION CAUSED BY OR DUE TO DISTRIBUTION OR SALE OF THIS PRODUCT (I.E. INDIVIDUAL GETTING HURT OR MALFUNCTION OF EQUIPMENT RESULTING IN LOSS OF TIME OR MONEY). SELLER SHALL HAVE NO LIABILITY TO BUYER FOR LOST PROFITS OR FOR SPECIAL CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES OF ANY KIND, WHETHER ARISING IN CONTRACT, TORT, AND PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POTENTIAL DAMAGES IN ADVANCE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY DAMAGES WHATSOEVER.
UNLESS OTHERWISE STATED PRICING DOES NOT INCLUDE FREIGHT, OR TAXES OF ANY KIND.
PURCHASER IS RESPONSIBLE TO VERIFY EQUIPMENT AND SPECIFICATION OF EQUIPMENT TO VERIFY EQUIPMENT WILL FIT CUSTOMERS NEEDS.
PROPOSAL DOES NOT ALLOW FOR STORAGE OR REHANDLING OF EQUIPMENT, ADDITIONAL COST MAY BE INCURRED IF SUCH MATTERS ARISE.
SELLERS ACCEPTANCE OF BUYER’S ORDER IS EXPRESSLY CONDITIONAL UPON BUYERS AGREEMENT TO THESE TERMS AND CONDITIONS. ALL INCONSITANT OR ADDITIONAL TERMS, MODIFICATIONS, OR CHANGES ARE OF THIS AGREEMENT UNLESS SELLER AGREES TO SUCH TERMS IN WRITING.
SELLER SHALL NOT BE LIABLE FOR DELIVERY DELAYS BEYOND ITS CONTROL, INCLUDING DELAYS CAUSED BY ITS SUPPLIERS. ALL DELIVERY DATES ARE MERELY GOOD FAITH ESTIMATES. ALL SHIPMENTS ARE FOR SELLERS DISTRIBUTION POINT AND THE RISK OF LOSS PASSES TO BUYER UPON DELIVERY.
SELLER DOES NOT WARRANT THE PRODUCTS WHICH IT DOES NOT MANUFACTURE RATHER; ALL WARRANTIES FOR THESE PRODUCTS ARE SUPPLIED BY THE MANUFACTURER. SELLER EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SELLER SHALL BE ENTITLED TO REIMBURSMENT OF COLLECTION COSTS AND REASONABLE ATTORNEY FEES INCURRED TO ENFORCE ITS RIGHTS UNDER THIS AGREEMENT.
THESE TERMS AND CONDITIONS AND ANY OTHER WRITING SIGNED BY SELLER CONSTITUTE THE ENTIRE AGREEMENT, AND MAY NOT BE MODIFIED OTHER THAN BY WRITTEN DOCUMENTATION SIGNED BY SELLER. PLEASE NOTE:
INFORMATION IS ACCURATE AND CORRECT TO THE BEST OF MY KNOWLEDGE.
G&S MACHINERY HAS THE RIGHT TO CHANGE PRICING OR CANCEL SALE AT ANY TIME AS ITEM IS ALSO BEING ADVERTISED OUTSIDE OF EBAY.
RESPEECFULLY
Bryan
Price type
IN STOCK
OUT STOCK
.
