Pressure Switch Emglo Air Compressor

Pressure Switch For Emglo, Dewalt, Porter Cable, Jenny, Quincy, Rol-Air,  J-Air and Others. Part # PBVL-4 Furnas Electric Pressure Switch,  1/4" NPT  4 Port Cuts in at 95psi and out at 125psi Can easily be adjusted up to 150psi. 20AMP 120V or 240V Applications .

Has unloader valve that is adjustable positioning.

Lever on/off switch . DEWALT # 5130028-01 C/H:  CW207576AV If you are unsure if this is the correct switch, please send us your model & serial number and we will be happy to help.

PACKED WITH CARE!!!

If your air compressor fills up to pressure, but struggles to restart or the unloader valve on the pressure switch continues to release air, your check valve is likely the cause. You can run a quick test by running the compressor up to full pressure, once it shuts down disconnect the power to the unit. Loosen the nut on the air exhaust tube at the pump head...there should be no air present. If you have air present, the check valve is bad and needs to be replaced. If you would like further assistance, please contact us and we will be happy to help. We Have a Large Inventory of Emglo, Dewalt, Jenny, Rolair & Quincy Compressor Parts Available We Are an Authorized Warranty & Service Center All Parts are backed by the Manufacture's Warranty We have a Large Inventory of Air Compressor Parts Available . We will be happy to assist you in finding your correct part(s). Please send us your Model and Spec number. We will look them up and get right back to you with your information What you see online is only a fraction of what we carry.  We stock thousands of parts. Please contact us if you can’t find what you’re looking for and we will be happy to help. We have been in the industry for over 30 years and we are committed to give the best customer service possible.