Pbvl Emglo Air Compressor

Genuine Emglo  Pressure Switch "PBVL" Part # PBVL MADE IN THE USA by Furnas / Hubble . 1/4" NPT Single Cuts in at 95psi and out at 125psi All work for 110 or 220V.

Has unloader valve on the side.

on/off switch

.  

If you are unsure if this is the correct switch, please send us your model & serial number and we will be happy to help. Packed With Care and Ships ASAP!!! If your air compressor fills up to pressure, but struggles to restart or the unloader valve on the pressure switch continues to release air, your check valve is likely the cause. You can run a quick test by running the compressor up to full pressure, once it shuts down disconnect the power to the unit. Loosen the nut on the air exhaust tube at the pump head...there should be no air present. If you have air present, the check valve is bad and needs to be replaced. If you would like further assistance, please contact us and we will be happy to help. We have a Large Inventory of Power Tool Parts Available. We are an Authorized Warranty and Service Center for Many Brands Parts are Backed by The Manufacture's Warranty We will be happy to assist you in finding your correct part(s). Please send us your Model and Spec number. We will look them up and get right back to you with your information What you see online is only a fraction of what we carry.  We stock thousands of parts. Please contact us if you can’t find what you’re looking for and we will be happy to help. We have been in the industry for over 30 years and we are committed to give the best customer service possible.