Oliver 88-D 16" Tilting Arbor Table Saw 7-1/2 HP 220V 3 Phase w/ Shop Fox

Oliver 16" Tilting Arbor Table Saw. This saw is used but is in good overall condition for its age. This is a "direct drive" saw meaning the blade mounts directly to the drive motor. Motor has a new front bearing. The rear bearing was fine when checked. Motor has compression cup type grease tubes for greasing the bearings. Rear bearing, grease tubes and cups have been flushed of the old grease and repacked with new grease. Motor runs smooth. The tilt and raise mechanisms were cleaned and greased while we had the table off replacing the motor bearing. Tilt and raise both operate smoothly.
Saw has a Shop Fox, Aluma-Classic rip fence installed on it. The original Oliver fence is also with the saw, as well as its original miter guide. Comes with two 16" combination blades. The one installed cuts okay but makes a ringing sound when running. The second blade is believed to be new and is a Freud LU84MO16, 80 tooth combination blade.

Mfg. By: Oliver

Model: 88-D

Serial No: 71872

Motor: 7.5 HP, 3600 RPM, 220V Three Phase

Max Blade Diameter: 16"

Saw Arbor: 1"

Main Table: 40" Wide X 44" Deep

Extension Table: 18" X 18-1/2"

Overall Table Width: 58"

SHIPPING: Buyer to pay actual shipping cost, via motor freight, from Muscle Shoals, AL 35661. Or, you are more than welcome to pick the item up here. For shipping quotes please contact us with your zip code, address type (commercial or residential) and let us know if you have a way of unloading the item (forklift, loading dock, etc.) or if you will need lift-gate truck service.
PAYMENT: Paypal, E-bay Payments
If you have any other questions, please feel free to contact us. You may do so by using the "ask seller a question" link on this listing. Be sure to check out our other listings for more new and used surplus items.