New 12v 200 Psi 1.8cfm Compressor

This listing is for a brand new 1/4HP Air Compressor.  This Pump is a truly rated, 200 PSI-rated compressor. It features horizontal cooling fins and a trapezoidal head design, a standard 3/8” stainless steel braided leader hose with 3/8” NPT inline check valve and insulated wiring. These can replace various Thomas models such as the 309DC56/12, 315CDC, 337, 319, 010, and 327 models. These are widely used in a variety of applications including air horns for semi's, rv's, buses, trucks, as well as for Air brakes, Air ride suspensions, RV air doors & Slide outs, on board air systems used to inflate tires up to 35" or any inflatables at the lake, Research Sprayers, and much more.  See specs below to verify compatibility. FEATURES • Oil-less design • Permanently lubricated and sealed bearings • Cast iron cylinders • PTFE piston rings and skirts • Long, service free life • Field service capability • Totally enclosed motor • Low vibration • Quiet Operation • Low profile • Fifty-micron inlet filter(s) These are BRAND New and carry a full OEM warranty w/ each purchase.  All items typically ship the same day or day after w/ tracking uploaded. Motor Voltage: 12 Volts Max. Current Consumption: 23 Amps Recommended Fuse: 30 Amps Motor Type: Permanent Magnetic Horsepower: 1/4 Max. Working Pressure: 200 PSI Max. Duty Cycle (@ 72ºF & 100/200 PSI): 100% / 50% Minutes On/Off (@ 72ºF & 100 PSI): Continuous Max. Ambient Temperature: 158ºF Min. Ambient Temperature: -58ºF Auto. Reset Thermal Protection: Yes Dimensions: 10.87”L x 4.2”W x 6.75”H FEATURES – Thermal Overload Protector – Check Valve – Vibration Isolators – Mounting Hardware – Stainless Steel Braided Leader Hose – Air Line for Remote Mount Air Filter – Remote Mount Air Filter Assembly – (2) Replacement Air Filter Elements – Installation Instructions SPECIFICATIONS – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 100% @ 100 PSI (50% @ 200 PSI) – Max. Working Pressure: 200 PSI – Max. Air Tank Size: 5.0 Gallon – Max. 12V Amp Draw: 23 Amps – Ingress Protection Rating: IP67 – Dimensions: 10.87″L x 4.2″W x 6.75″H – Net Weight: 11.05 lbs. – – – – – * For 12V Only. Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA PSI CFM A BAR LPM A 0 1.86 10 0 52.7 10 10 1.75 12 1.0 47.5 13 20 1.59 14 2.0 43.2 15 30 1.52 15 3.0 40.7 16 40 1.45 16 4.0 38.1 18 50 1.41 17 5.0 35.3 18 60 1.33 18 6.0 32.6 19 70 1.26 18 7.0 30.0 20 80 1.20 19 8.0 27.0 22 90 1.13 19 9.0 25.0 22 100 1.07 20 10.0 22.3 21 110 0.99 21 11.0 20.1 21 120 0.93 23 12.0 18.3 21 130 0.88 22 13.0 16.0 20 140 0.82 22 14.0 14.0 19 150 0.75 21 160 0.71 21 170 0.67 21 180 0.61 21 190 0.55 20 200 0.51 19 * Supply Voltage: 13.8 Volts
FILL RATES 2.5 GALLON TANK FILL RATE 0 to 145 PSI 2 min. 50 sec. (± 10 sec.) 110 to 145 PSI 57 sec. (± 05 sec.) 0 to 200 PSI 5 min. 02 sec. (± 10 sec.) 165 to 200 PSI 1 min. 30 sec. (± 05 sec.) 5.0 GALLON TANK FILL RATE 0 to 145 PSI 6 min. 02 sec. (± 10 sec.) 110 to 145 PSI 1 min. 55 sec. (± 05 sec.) 0 to 200 PSI 10 min. 30 sec. (± 15 sec.) 165 to 200 PSI 3 min. 10 sec. (± 10 sec.)

Returns Accepted for this item if it's within 30 Days