Makita XPS01PTJ 36-Volt 6-1/2-Inch X2 LXT Cordless Plunge Circular

The Makita 18V X2 (36V) LXT Brushless 6-1/2" Plunge Circular Saw Kit (XPS01PTJ) delivers precise and more accurate cutting when combined with an optional guide rail system (sold separately). The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built brushless motor powered by two 18V LXT batteries with Automatic Speed Change Technology, which adjusts cutting speed and torque during the cut for optimum performance. The Saw has a variable speed control dial (2,500 - 6,300 RPM), with soft start and an electric brake for added convenience. It has a large 2-3/16" cutting capacity at 90 degrees, with a bevel capability of -1Degree to 48Degree and positive stops at 22.5Degree and 45Degree. When used with a rail system (sold separately) the Plunge Circular Saw is a more portable option to a table saw for select applications, and is ideal for use on the job site or in a workshop.
Features

Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord

Makita built electronically controlled BL Brushless Motor delivers 6,300 RPM for maximum performance and 50% longer run time per charge

Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance

Variable speed control dial (2,500 - 6,300 RPM) for optimum performance in a variety of materials

Close to the wall cutting (11/16") for expanded cutting applications

Ideal for cutting large wood panels and other wood materials in confined areas

Large cutting capacity (2-3/16" at 90-Degrees; and 1-9/16" at 45-Degrees)

Bevel capability (-1-Degrees to 48-Degrees) with positive stops at 22.5-Degrees and 45-Degrees

Electronic speed control maintains constant speed under load for smooth cutting

Soft start feature for smooth start-ups

Easy-to-set depth adjustment with large scale

Smooth and convenient plunge release lever for operator comfort

Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts

On-board hex wrench for fast and easy blade changes

Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade case for easier blade installation

Built-in depth stop allows a preliminary first cut of 2 to 3mm to be performed prior to cutting through the entire material for clean and splinter-free cutting

Rubberized soft grip handle provides increased comfort on the job

Large 1-7/16" rear dust port directs material away from the operator and easily connects to a vacuum system

Includes a premium 55 tooth ultra thin kerf carbide tipped saw blade (B-57071) ideal for cordless circular saws offering up to 66% more cuts per charge compared to our standard corded plunge saw blade (B-07353)

Optional guide rail system interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting

Slide lever on saw base designed to engage the optional guide rail (sold separately) when bevel cutting for stability

Electric brake for maximum productivity

Compact and ergonomic design at 13-5/8" long; weighs only 11.2 lbs. with batteries (batteries not included) for reduced operator fatigue

Precise straight and 45-Degrees bevel cuts as the position of the blade enters the material on the same sight line when using a guide rail

3-stage L.E.D. gauges indicate battery charge levels

Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating

Dual Port Rapid Optimum Charger charges two batteries at the same time

The Dual Port Rapid Optimum Charger communicates with the batteries built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature

For more efficient charging, the Dual Port Rapid Optimum Charger has built-in fans to cool the batteries faster

Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger

Two 18V LXT Lithium-Ion Batteries deliver the power and performance of a corded plunge circular saw without leaving the 18V LXT platform

18V LXT Lithium-Ion 5.0Ah batteries (BL1850B) feature an integrated L.E.D. battery charge level indicator

18V LXT Lithium-Ion 5.0Ah batteries (BL1850B) reach a full charge in 45 minutes or less

Compatible with Makita 18V Lithium-Ion batteries with a Star symbol

What's in The Box

36-Volt X2 LXT 6-1/2-Inch Plunge Circular Saw

(2) 18-Volt 5.0Ah Lithium-Ion Battery

18-Volt Lithium-Ion Dual Port Charger

(1) 6-1/2-Inch 55-Tooth Plunge Saw Blade

Hex Wrench

X-Large Interlocking Case

Medium Interlocking Case

Owner's Manual

Warranty

3-Year Limited Factory Warranty

30 Day Satisfaction Guaranteed

Specifications Sku XPS01PTJ Brand Makita Voltage 36v X2 LXT Blade Diameter 6-1/2 in. Amp Hour 5.0Ah Arbor 13/16 in. Max. Cutting Capacity at 90-Degrees 2-3/16 in. Max. Cutting Capacity at 45-Degrees 1-9/16 in. No Load Speed 2,500 - 6,300 Rpm Speed Settings 5 Length 13-5/8 in. Width 9-1/2 in. Height 10-3/4 in. Product Weight 28 lbs.
why buy from us?
secure & hassle-free shopping
All items are covered by manufacturer warranty.
fast shipping
Most orders delivered in 1-3 business days.
customer service
Call us toll free:
satisfaction guaranteed
All our sales are backed by a 30-day satisfaction guarantee.

Returns Accepted for this item if it's within 30 Days