Kussmaul Electronics 12 Volt 100psi Auto-pump Air Compressor
Model #091-9-12v
USD $589.99
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This listing is for a brand new Thomas Oil-less WOB-L Piston Compressor private labelled and used in Kussmaul air systems. 405ADC38/12 model.
These do not come with any other accessories or parts. DOES Not include the moisture trap, auto start stop assembly.
See specs below to match up to your existing needs.
These do not come with any accessories or attachments.
These must be protected from the elements; they cannot get wet!
Brand:Thomas
Flow Rate (CFM):.79
Flow Rate (LPM):22
Max Pressure (PSIG):100
Max Pressure (bar):6.9
Voltage (DC):12Piston Air Compressor, 1/10 HP, Voltage 12VDCFull Load Amps 10.5,Inlet Size 1/8 In. NPT, Outlet Size 1/4 In. NPT, Max. PSI Cont./Int. 100/100, Free Air CFM @ 50 PSI 0.41. Overall Length 7-1/2 In., Overall Width 4-1/4 In., Overall Height 5-1/3 In., Cylinder Material Aluminum, Number of Cylinders 1, Motor Type Permanent Magnet, 3450 RPM, 63 dBA @ 60 psi Sound Rating Lubrication Type Oil-Less, Finish Gray, Valve Corrosion Resistant
INTRODUCTIONThe Auto-Pump Air Compressor system is a compact electric motor operated single cylinderair compressor designed specifically for installation on vehicles with air brakes . During longidle periods of the vehicle when even the slightest seepage can cause an air brake systempressure to drop below the brake lockup pressure, the Auto Pump automatically starts to maintainthe pressure.The Auto Pump motor is directly coupled to the compressor section eliminating all belts andpulleys assuring long life and reliable operation . A heavy duty pressure switch is adjustedto start the compressor when the system pressure drops below 75 psi and stops the compressorwhen 95 psi is attained . The start up pressure is field adjustable - the pressure differentialbetween start up and stopping is fixed. Please read and follow the installation instructionscarefully . The Auto Pump requires no routine maintenance . A careful installation will assureyears of trouble free operation.CAUTIONNO CONDENSATE ORWATER MUST BE ALLOWEDTO ENTER OR ACCUMULATEINTHE OUTPUTOF THE AUTO PUMP.ROUTE OUTPUT PRESSURELINE DOWNWARD FROMAUTO PUMP TO PERMITMOISTURE TO DRAIN AWAY.WATER IN THE PUMPOUTLET WILL INDUCEFAILURE !WATER DAMAGE WILLVOID WARRANTYVEHICLE TUBING INSTALLATION1. Mount all components in a suitable location, preferably in a high area above the air system .Do not mount in engine compartment or near any source of heat or dirt . The system may beconnected to any point in the vehicle's air system .2. Mount air compressor in a vertical position as shown.3. CAUTION no condensate or water must be allowed to enter or accumulate in the output of theAuto Pump . Route output pressure line downward from Auto Pump to permit moisture to drainaway . Water in the pump outlet will induce failure .4. All connection for air lines are 1/4" NPT . Use Teflon tape, or equivalent on all connections toinsure no leakage of air.5. The recommended installation of the Auto Pump air compressor system is shown below.6. Mount the air compressor. Connect a suitable piece of flexible tubing from the outlet port ofcompressor to the air tank . (Tubing and connectors are not supplied .)7. An optional water separator (Auto Clean 091-9G) is available to trap moisture in the air line andstop the flow of moisture back into compressor .8. An optional Mounting Plate 091-9H is available to reduce any vibration and noise from AutoPump and to simplify pump mounting.NOTE: Compressor must be mounted above airtank to assure that moisture will flow away fromcompressor.COMPRESSOR OUTPUT IS 100 PSI MAXIMUM. DONOT EXCEED 100 PSI OR YOU WILL VOID WARRANTY.1. Remove cover of the Pressure Switch on the Auto Pump.2. Wire the pressure switch to the battery and a good chassis ground, use #14 AWG WIREMINIMUM .3. Reinstall cover of Pressure Switch .4. The compressor is calibrated to cut-in at 75 PSI and cut-out at 95 PSI . For higher cut-in andcut-out, turn the range nut clockwise . To lower cut-in turn range nut counterclockwise . Donot exceed 100 PSI .5. 091-9 AUTO PUMP can be wired to a positive or negative system vehicle .6. Optional switch and fuse can be installed as shown (use 20 amp rated switch and 15 amp SLOBLOfuse).
These do not come with any other accessories or parts. DOES Not include the moisture trap, auto start stop assembly.
See specs below to match up to your existing needs.
These do not come with any accessories or attachments.
These must be protected from the elements; they cannot get wet!
Brand:Thomas
Flow Rate (CFM):.79
Flow Rate (LPM):22
Max Pressure (PSIG):100
Max Pressure (bar):6.9
Voltage (DC):12Piston Air Compressor, 1/10 HP, Voltage 12VDCFull Load Amps 10.5,Inlet Size 1/8 In. NPT, Outlet Size 1/4 In. NPT, Max. PSI Cont./Int. 100/100, Free Air CFM @ 50 PSI 0.41. Overall Length 7-1/2 In., Overall Width 4-1/4 In., Overall Height 5-1/3 In., Cylinder Material Aluminum, Number of Cylinders 1, Motor Type Permanent Magnet, 3450 RPM, 63 dBA @ 60 psi Sound Rating Lubrication Type Oil-Less, Finish Gray, Valve Corrosion Resistant
INTRODUCTIONThe Auto-Pump Air Compressor system is a compact electric motor operated single cylinderair compressor designed specifically for installation on vehicles with air brakes . During longidle periods of the vehicle when even the slightest seepage can cause an air brake systempressure to drop below the brake lockup pressure, the Auto Pump automatically starts to maintainthe pressure.The Auto Pump motor is directly coupled to the compressor section eliminating all belts andpulleys assuring long life and reliable operation . A heavy duty pressure switch is adjustedto start the compressor when the system pressure drops below 75 psi and stops the compressorwhen 95 psi is attained . The start up pressure is field adjustable - the pressure differentialbetween start up and stopping is fixed. Please read and follow the installation instructionscarefully . The Auto Pump requires no routine maintenance . A careful installation will assureyears of trouble free operation.CAUTIONNO CONDENSATE ORWATER MUST BE ALLOWEDTO ENTER OR ACCUMULATEINTHE OUTPUTOF THE AUTO PUMP.ROUTE OUTPUT PRESSURELINE DOWNWARD FROMAUTO PUMP TO PERMITMOISTURE TO DRAIN AWAY.WATER IN THE PUMPOUTLET WILL INDUCEFAILURE !WATER DAMAGE WILLVOID WARRANTYVEHICLE TUBING INSTALLATION1. Mount all components in a suitable location, preferably in a high area above the air system .Do not mount in engine compartment or near any source of heat or dirt . The system may beconnected to any point in the vehicle's air system .2. Mount air compressor in a vertical position as shown.3. CAUTION no condensate or water must be allowed to enter or accumulate in the output of theAuto Pump . Route output pressure line downward from Auto Pump to permit moisture to drainaway . Water in the pump outlet will induce failure .4. All connection for air lines are 1/4" NPT . Use Teflon tape, or equivalent on all connections toinsure no leakage of air.5. The recommended installation of the Auto Pump air compressor system is shown below.6. Mount the air compressor. Connect a suitable piece of flexible tubing from the outlet port ofcompressor to the air tank . (Tubing and connectors are not supplied .)7. An optional water separator (Auto Clean 091-9G) is available to trap moisture in the air line andstop the flow of moisture back into compressor .8. An optional Mounting Plate 091-9H is available to reduce any vibration and noise from AutoPump and to simplify pump mounting.NOTE: Compressor must be mounted above airtank to assure that moisture will flow away fromcompressor.COMPRESSOR OUTPUT IS 100 PSI MAXIMUM. DONOT EXCEED 100 PSI OR YOU WILL VOID WARRANTY.1. Remove cover of the Pressure Switch on the Auto Pump.2. Wire the pressure switch to the battery and a good chassis ground, use #14 AWG WIREMINIMUM .3. Reinstall cover of Pressure Switch .4. The compressor is calibrated to cut-in at 75 PSI and cut-out at 95 PSI . For higher cut-in andcut-out, turn the range nut clockwise . To lower cut-in turn range nut counterclockwise . Donot exceed 100 PSI .5. 091-9 AUTO PUMP can be wired to a positive or negative system vehicle .6. Optional switch and fuse can be installed as shown (use 20 amp rated switch and 15 amp SLOBLOfuse).
Price type
IN STOCK
OUT STOCK
.
