Diamond Hole Saw Drill Bit Tile Glass 3/8 3/4 1/2 1 2 3 4 5 6 7 8 inch All Sizes

Diamond Coated Hole Saw Drill Bits Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps SHIPS FROM New Jersey USA
We have all the sizes you may need. AVAILABLE SIZES:
1mm
1/8 inch
5/32 inch
3/16 inch
1/4 inch
5/16 inch
3/8 inch
1/2 inch
5/8 inch
3/4 inch
7/8 inch
1 inch
1 3/16 inch
1 1/4 inch
1 3/8 inch
1 1/2 inch
1 9/16 inch
1 3/4 inch
2 inch
2 3/8 inch
2 1/2 inch
2 3/4 inch
3 inch
3 3/8 inch
3 3/4 inch
4 inch
4 3/8 inch
4 1/2 inch
4 3/4 inch
5 inch
6 inch
7 inch
7.5
8 inch
Suitable for use in drill hole on glass, marble, tile or granite.
The largest shank is 3/8 inch thick. You can use your hand drill.
Diamond coated hole saw
Basic Instructions - Please refer to Youtube Videos for DIY Instructions
- It is a good idea to start slowly, with an initial agree roughly around 45 degrees. The idea is to make an initial mark for the drill bit.
- Once you have made a slot - mark for your drill bit, you can go vertical slowly.  angle. Go vertical after you make an initial mark.
- Just let the tool work it self - take your time.
- Using water as a coolant is a good idea. You can use running water or you can make a small water pool around the hold with some plumbers putty or clay.
We have sold over thousands of units, they work great, we guarantee it.
We have many many sizes available from 1mm to 4 1/2".
Wholesale discounts available for sets and volume orders.
FOR ALL AVAILABLE SIZES, PLEASE VISIT OUR EBAY STORE: Diamond Tools - Drill Bits Category

Returns Accepted for this item if it's within 30 Days