Craftsman 10" Band Saw #113.244513 Zero Clearance Table Insert (No

Craftsman 10" Band Saw #113.244513 Zero Clearance Table Insert "3D Printed" Zero-clearance inserts improve cut quality and make your saw safer to use . Zero-clearance slots are typically no wider than the blade, so off- cuts can't get stuck and tear-out is dramatically reduced. I have designed this insert to have about a 2mm clearance because of the way my blade moves. If you get one that is really tight fitting into the table itself, just take a file or emery board and clean of the edges due to some flash from the printing process, it should not take much. If you have any problems just let me know and I can work with you to get it to fit but there should not be…. Note: This is for the table insert only, no blades are included! Note: Although this insert has the same top dimensions as the 113.244510 model, it will not fit the 113.244510 due to the bottom support layout unless you do some sanding. If you need an insert for the 113.244510 model see my other listings I have available.