CNC 0.8KW Water Cooled Spindle Motor ER11+1.5KW VFD Inverter+65mm

Package include: 1 & 800w ER11 Water Cooled Spindle 65x158mm 1 & 1000Hz 110v 1.5w VFD/Inverter 1 &  65mm Mount Bracket 1 & 80w Water Pump 1 Set ER11 Collets 1 & 5m tube Size: 65x158mm ( Body diameter:65mm;  Length:158mm ) Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed. Cooling: Water cooling Power Interface: The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. Power: 0.8kw Voltage: 110vAC(If you need 220v/380v spindle ,please leave message to us,thank you) Frequency: 0-400Hz Speed:  0-24000rpm Runout Off:  0.01mm 4pcs bearings Water Cooling ER11 collet chunk Grease Lubrication Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working, please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)

Returns Accepted for this item if it's within 30 Days