Clemco Cool Air Conditioner for HP blasting helmets #23825

Clemco Cool Air Conditioner for HP blasting helmets #23825

New Clem-CoolAir Conditioner allows the blast operator to control the temperature and volume of air to a Clemco high-pressure Type CE continuous flow supplied-air respirator within a preset range and to cool the air by as much as 50 degrees F. Approved by NIOSH for use only with Clemco Apollo HP high-pressure Type CE supplied-air respirators (not for use with low-pressure respirators).

Requirements for Operation:

20 cfm at 90 to 100 psi of Grade D quality breathing-air as defined by the Compressed Gas Association Commodity Specification: G-7.1) ([link removed by eBay]

Pressure requierements vary with hose length. (hose offered in 25 ft increments) Minimum pressure to produce minimum airflow to respirator.

25 ft - 75 ft 90 psi

100 ft - 200 ft 95 psi

NOTES:

1. Maximum air pressure: 100 psi.

2. Maximum hose length: 200 ft when used with respirator.

Can ship from various locations in small or large quantities.

For all your sandblasting needs please check our store or call us at 954  -   923  -  8323.

Our goal is to provide world class customer service and the lowest prices possible.

Abrasive Blasting Depot.