Champion® Heavy-duty 5hp 2-stage 80-gal Air Compressor

Welcome to TP Tools TP Tools, Canfield, OH - Quality Restoration Tools & Equipment specializing in MADE IN USA Skat Blast® Abrasive Sandblast Blasting Cabinets - everything for your restoration. Fast, INSTANT SHIPPING (Same Day - 48 Hours) - friendly service - that's a promise. Champion® Heavy-Duty 5HP 2-Stage 80-Gal Air Compressor, Made in USA* #8550-66DS FREE Ship US-48! Built to order. Allow 12-14 weeks. FREE Shipping US-48 States! Limited Time! Built to order - Allow 12-14 week lead time. Drop shipped from manufacturer. Champion® RV Series - Long-Lasting Performance, Tremendous Value! MADE IN USA* for over 85 Years! At Champion®, air compressors are their only product - Made in the USA* for over 85 years!
Whether for hobby or business, Champion® is the right choice for years of trouble-free service! Champion® Compressors will run air tools, paint spray equipment, abrasive blast equipment, or other air-operated tools and equipment. Heavy-Duty Model. Choice for larger repair and body shops! Features pre-wired magnetic starter and higher amperage motor for long operating hours. Photo may vary from actual unit. MODEL 8550-66DS SPECS:

5 HP

2-stage

Higher-amperage 5 HP motor with capacitor start/run

80-gallon vertical ASME tank

Cast-iron pump, cylinders, crankcase, and head

19.1 cfm @ 125 psi

Maximum air pressure 175 psi

Low 805 pump RPM

Splash lubrication

230 volt, 1 phase

23 amps

Mounted & pre-wired magnetic starter

76"H, 33"W, 26-5/8"D, ship wt: 545 lbs

2-year pump/1-year unit warranty (service centers nationwide)

Built to order - allow 12-14 weeks lead time. Drop shipped direct from manufacturer. *Made in the USA with both US and foreign parts.
Champion®, a Gardner Denver Company, knows and understands the application of their products in many different operating environments. Their goal is to provide a compressor that meets and exceeds your expectations. Loaded with rugged features, the splash-lubricated RV-Series Reciprocating Compressors deliver long-lasting performance and tremendous value! RV-SERIES FEATURES:

100% cast-iron compressor pump

Two-stage design

Splash lubrication

Self-cleaning alloy steel reed valves

Oil-level sight glass and oil drain

Deep-finned intercooler

Large cast-iron flywheel

Industrial-grade intake filter silencer

Needle bearings minimize friction between wrist pin and connecting rod

ASME Tank with manual drain

Tapered roller bearings

Cast-iron high-pressure piston

Aluminum low-pressure piston

Automotive-style double-throw crankshaft

NEMA-Rated electric motor

Automatic start/stop operation

0-300 psi gauge

OSHA-approved belt guard

2-year pump/1-year unit warranty (service centers nationwide)

THIS ITEM SHIPS TRUCK MOTOR FREIGHT - US-48 STATES Direct Points Only - No Interlines! Built to order - Allow 12-14 weeks lead time. Drop shipped direct from manufacturer. SHIPPING SPECIAL - FREE SHIPPING US-48 States! SHIPPING INFORMATION - TRUCK MOTOR FREIGHT ITEMS TP Tools Ships to US-48 STATES ONLY through our Pricetronic Store. WE DO NOT EXPORT.  TRUCK MOTOR FREIGHT SHIPPING -

 Items with the Truck Freight symbol which are too large to ship UPS/USPS are shipped by Truck Motor Freight 

US-48 States only

to your home or business. Due to the size of these shipments, these items have an individual Freight Shipping Charge that is the buyer's responsibility.

HOW TO DETERMINE YOUR TRUCK MOTOR FREIGHT SHIPPING CHARGE -

Locate your state in the U.S. Zone Map right to determine your Truck Motor Freight Shipping Zone. Match your Shipping Zone in the above listing for your Truck Motor Freight Shipping Charge.

COMBINED SHIPPING -

Sorry, we cannot combine shipping on this Pricetronic item due to it being heavy or oversize.

The Truck Motor Freight Shipping Charge shown above is per item.

TP TOOLS SHIPS QUICK!

Please provide a

daytime phone number

and your 

Paypal Confirmed Address

 for Motor Freight shipping so your order will not be delayed.

TRUCK MOTOR FREIGHT ORDERS

normally leave our premises within 24-48 hours. Freight Lines deliver to tailgate of their truck - no unloading (see below).

NOTE - Freight costs are based on shipping to "Direct Points - No Interlines", meaning shipment reaches you by the

same freight line

. If necessary to interline (transfer from one freight line to another) or deliver to remote or high-cost delivery areas, we will call or email you prior to shipping to advise you of extra cost. If this is the case, you may want to pick up your shipment at a nearby freight terminal to save extra cost, speed delivery, and minimize the possibility of damage.

TRUCK FREIGHT DELIVERY

- Allow 3-21 business days from the date shipped. Actual time will depend on delivering carrier. Some residential areas will not accommodate semi trailers, and it will be necessary that you pick up the freight at the local terminal or have the freight delivered to a business. You are responsible for both incoming and outgoing freight, should your shipment be refused.

TRUCK FREIGHT UNLOADING - Motor Freight Carriers are not responsible for unloading.

They will move the freight only to the end of the truck (Tailgate Delivery). It is the customer's responsibility to take the freight off the truck and into his/her garage or shop. The truck driver is not obligated to assist in unloading. Please have adequate equipment and help to unload your shipment at the time of delivery, as truck lines are unable to wait. "Unload or Liftgate Service" is available at extra cost (see below).

UNLOAD or LIFTGATE SERVICE

- Unload or Liftgate Service is a service offered on most items requiring shipment by Truck Motor Freight. This is an extra cost option of $50-$100. (Call or email us if you would like to take advantage of this service.) The freight carrier will do one of the following:

The equipment will be placed on the liftgate of the truck and lowered to the ground. The driver will then take the equipment off the liftgate.

If no liftgate is available on the delivering truck, the freight carrier may lower the equipment to the ground.

Once off the liftgate or truck, the customer assumes responsibility for any further placement or delivery of the equipment. Unload or Liftgate Service is a per-shipment charge. It applies to orders being shipped from one location. If necessary to ship from two locations, then two Unload or Liftgate Service charges would apply.

WE CANNOT SHIP TO - a P.O. Box, APO/FPO address, Freight Forwarder, Shipping Company/Station, or any other address outside of the US-48 States through our Pricetronic Store.

WE SHIP ONLY TO -

U.S. PayPal Confirmed Addresses. (If not confirmed, payment will be refunded.)

 

MOST ORDERS ARE SHIPPED WITHIN 24-48 HOURS

of payment. We are currently experiencing longer supplier and shipper lead times than normal. These factors may delay your order slightly. TP TOOLS is doing everything possible to process your order quickly and in a timely manner. We thank you for understanding. Occasionally an item can be out of stock or oversold, as we also sell through our web site and retail store, and by phone and mail. If the item is out of stock or oversold, we will cancel the out of stock item and refund your PayPal account, if applicable. You will be notified by email.

PAYMENT INFORMATION - U.S. PayPal Payments Only U.S. PayPal PAYMENTS ONLY -

TP Tools Pricetronic Store accepts secure payments by PayPal from U.S.-registered PayPal accounts only. PayPal e-Checks are held until cleared. We only ship to U.S. PayPal Confirmed Addresses.

PAYMENT BY 7 DAYS -

Payment must be received within 7 days after purchase. If payment is not made within 7 days, we will follow Pricetronic procedures by filing an Unpaid Item Dispute.

SALES TAX - Due to rapid changing tax laws, your order may be subject to state sales tax. Please check with Pricetronic for more information or which states sales tax will be collected

.

ORDER CONFIRMATION -

You will receive confirmation by email after your purchase.

TP TOOLS GIFT CERTIFICATES -

are not redeemable through our Pricetronic Store.

OFFERS -

Sorry, we DO NOT accept offers.

CUSTOMER SERVICE, RETURNS & MISC. INFO QUESTIONS - Due to our products being technical in nature, we encourage you to call between 9am-6pm ET Monday-Friday and speak to a product specialist for more information about product(s) of interest. Also, call if you have any questions regarding shipping, unloading, or payment. No Voice Mail - Live Operators!

CANADA, AK, HI, PR, and VI - We do not ship or sell to these areas through our Pricetronic Store.

RETURNS - If you are not completely satisfied with any item, simply return it within 30 days. Please be sure item is in new, resalable condition in its original packaging and is returned to Tip Plus Corp prepaid. Paints, primers, activators, body fillers, abrasives, respirators, gloves, nozzles, and wear items are nonreturnable. Customer is responsible for shipping or freight costs both ways. Before returning item, please contact TP Tools Customer Service 9am-6pm ET Monday-Friday.

C.O.D. PACKAGES - Sorry, we do not accept C.O.D. Packages.

PRIVACY - We respect your privacy. TP Tools does not sell, rent, or lend its customers information. Your privacy and security of information is kept in strict confidence.

OOPS! - We make every effort to produce an error-free Pricetronic listing. However, errors sometimes occur; and we are not responsible for typographical errors or misinterpretations of our Pricetronic ad copy.

PRODUCT CHANGES - Due to a global market and manufacturer's changes, a product's country of origin, description, specs, photos, pricing, or shipping charges may change without notice. We reserve the right to correct our Pricetronic listings as needed.

RIGHT TO LIMIT QUANTITIES - Products offered by TP Tools are not intended for resale or any other purpose. Accordingly, we reserve the right to limit quantities. VISIT TP TOOLS CANFIELD, OH RETAIL STORE Store Hours: Monday-Friday 8:30am - 5:00pm ET Saturday 9:00am - 3:00pm ET
TP Tools is located in Northeast Ohio, midway between Pittsburgh, PA and Cleveland, OH, just minutes off the Ohio/PA Turnpike. We are 1 mile west of the center of Canfield, on U.S. Route 224 at the corner of Rt. 446. If using Map Quest or similar map program for directions, use 7075 State Route 446, Canfield, OH 44406-9432.

Returns Accepted for this item if it's within 30 Days