Air Suspension Compressor

*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).

2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.

3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).

Fits Land Rover LR3 2004-2009

Fits Land Rover LR4 2014-2010

Fits Land Rover Range Rover Sport 2005-2009

*Air Suspension Structure:

01  37106781843  Pneumatic Spring, Rear
02  37221092403  Threaded Joint
03  37206864215  Gas Supply Device
03  37206875176  Gas Supply Unit
03  61368373700  Relay Switch Weissgr
05  37206850595  Ventilation Pipeline
05  37206874510  Ventilation Pipeline
06  37206793277  Left Intake Pipe
07  37206793278  Right Intake Pipe
08  34306784201  Conductor Clamp Double
09  07130519991  Positioning Block
10  34326855500  Brake Pipeline Of Bracket
11  64111364073  Conductor Bracket
12  61359271313  Device Insertion Under Components
13  37146860385  Air Spring Control Unit
14  61131383776  Plug Contact Mqs
14  61136913626  Universal Plug Shell No Code
14  61136913644  Decoration Cover

Air Suspension Compressor Assembly Removal:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set the steering to straight ahead.
2.Raise the vehicle.
3.Remove protective shroud from under the rear of the vehicle to access the compressor.(picture 1,2)

4.Disconnect the three(3)electrical connectors from the valve block and compressor assembly.(picture 3,4,5)

5.Disconnect the rubber intake hose.(picture 6)

6.Disconnect the red and blue air lines from the valve block(note:Black line does not have to be disconnected).(picture 7,8)

7.Remove the four(4)outer mounting nuts that secure the compressor bracket assembly to the vehicle.(picture 9)

8.Remove the entire compressor assembly from the vehicle.(picture 10)

Air Suspension Compressor Removal:
1.Remove the air line from the compressor.(picture 11)

2.Remove the air line fitting from the air hose by sliding the threaded portion up the line and spreading the collet open. Slide the air fitting off the air line.(picture 12)

3.Remove the three(3)torx screws that secure the mounting bracket to the compressor.(picture 13,14)

Air Suspension Compressor Assembly Installation:
1.Install the air compressor assembly into the vehicle using the factory mounting hardware.(picture 15)

2.Remove plug and insert intake hose.(picture 16,17)

3.Reattach the red(upper)and blue(lower)air lines.(picture 18)

4.Reconnect all three(3)electrical plugs and clip the power plug into the bracket.(picture 19,20,21)

5.Replace the protective shroud over the compressor. Installation complete.

*Warning & Notice:

1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part.

2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance.

3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists.

4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.

5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.

6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays.

7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.

*OEM Part Number:

LR023964 LR044360, LR061663,

LR045251, LR072537, LR015303,

LR061888, LR010376, LR011837,

YWB500220

*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).

2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.

3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).

Fits Land Rover LR3 2004-2009

Fits Land Rover LR4 2014-2010

Fits Land Rover Range Rover Sport 2005-2009

*Air Suspension Structure:

01  37106781843  Pneumatic Spring, Rear
02  37221092403  Threaded Joint
03  37206864215  Gas Supply Device
03  37206875176  Gas Supply Unit
03  61368373700  Relay Switch Weissgr
05  37206850595  Ventilation Pipeline
05  37206874510  Ventilation Pipeline
06  37206793277  Left Intake Pipe
07  37206793278  Right Intake Pipe
08  34306784201  Conductor Clamp Double
09  07130519991  Positioning Block
10  34326855500  Brake Pipeline Of Bracket
11  64111364073  Conductor Bracket
12  61359271313  Device Insertion Under Components
13  37146860385  Air Spring Control Unit
14  61131383776  Plug Contact Mqs
14  61136913626  Universal Plug Shell No Code
14  61136913644  Decoration Cover

Air Suspension Compressor Assembly Removal:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set the steering to straight ahead.
2.Raise the vehicle.
3.Remove protective shroud from under the rear of the vehicle to access the compressor.(picture 1,2)

4.Disconnect the three(3)electrical connectors from the valve block and compressor assembly.(picture 3,4,5)

5.Disconnect the rubber intake hose.(picture 6)

6.Disconnect the red and blue air lines from the valve block(note:Black line does not have to be disconnected).(picture 7,8)

7.Remove the four(4)outer mounting nuts that secure the compressor bracket assembly to the vehicle.(picture 9)

8.Remove the entire compressor assembly from the vehicle.(picture 10)

Air Suspension Compressor Removal:
1.Remove the air line from the compressor.(picture 11)

2.Remove the air line fitting from the air hose by sliding the threaded portion up the line and spreading the collet open. Slide the air fitting off the air line.(picture 12)

3.Remove the three(3)torx screws that secure the mounting bracket to the compressor.(picture 13,14)

Air Suspension Compressor Assembly Installation:
1.Install the air compressor assembly into the vehicle using the factory mounting hardware.(picture 15)

2.Remove plug and insert intake hose.(picture 16,17)

3.Reattach the red(upper)and blue(lower)air lines.(picture 18)

4.Reconnect all three(3)electrical plugs and clip the power plug into the bracket.(picture 19,20,21)

5.Replace the protective shroud over the compressor. Installation complete.

*Warning & Notice:

1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part.

2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance.

3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists.

4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.

5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.

6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays.

7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.

*OEM Part Number:

LR023964 LR044360, LR061663,

LR045251, LR072537, LR015303,

LR061888, LR010376, LR011837,

YWB500220

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

1.We accept multiple payment methods, such as VISA, Master Card, etc..

2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

4.Payment must be received within 7 days as auction ended or order might be delayed.

We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back or exchange guarantee.

Q: How do I pay for my purchase?
A: MY store accepts VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

1. We will leave a feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.

*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).

2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.

3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).

Fits Land Rover LR3 2004-2009

Fits Land Rover LR4 2014-2010

Fits Land Rover Range Rover Sport 2005-2009

*Air Suspension Structure:

01  37106781843  Pneumatic Spring, Rear
02  37221092403  Threaded Joint
03  37206864215  Gas Supply Device
03  37206875176  Gas Supply Unit
03  61368373700  Relay Switch Weissgr
05  37206850595  Ventilation Pipeline
05  37206874510  Ventilation Pipeline
06  37206793277  Left Intake Pipe
07  37206793278  Right Intake Pipe
08  34306784201  Conductor Clamp Double
09  07130519991  Positioning Block
10  34326855500  Brake Pipeline Of Bracket
11  64111364073  Conductor Bracket
12  61359271313  Device Insertion Under Components
13  37146860385  Air Spring Control Unit
14  61131383776  Plug Contact Mqs
14  61136913626  Universal Plug Shell No Code
14  61136913644  Decoration Cover

Air Suspension Compressor Assembly Removal:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set the steering to straight ahead.
2.Raise the vehicle.
3.Remove protective shroud from under the rear of the vehicle to access the compressor.(picture 1,2)

4.Disconnect the three(3)electrical connectors from the valve block and compressor assembly.(picture 3,4,5)

5.Disconnect the rubber intake hose.(picture 6)

6.Disconnect the red and blue air lines from the valve block(note:Black line does not have to be disconnected).(picture 7,8)

7.Remove the four(4)outer mounting nuts that secure the compressor bracket assembly to the vehicle.(picture 9)

8.Remove the entire compressor assembly from the vehicle.(picture 10)

Air Suspension Compressor Removal:
1.Remove the air line from the compressor.(picture 11)

2.Remove the air line fitting from the air hose by sliding the threaded portion up the line and spreading the collet open. Slide the air fitting off the air line.(picture 12)

3.Remove the three(3)torx screws that secure the mounting bracket to the compressor.(picture 13,14)

Air Suspension Compressor Assembly Installation:
1.Install the air compressor assembly into the vehicle using the factory mounting hardware.(picture 15)

2.Remove plug and insert intake hose.(picture 16,17)

3.Reattach the red(upper)and blue(lower)air lines.(picture 18)

4.Reconnect all three(3)electrical plugs and clip the power plug into the bracket.(picture 19,20,21)

5.Replace the protective shroud over the compressor. Installation complete.

*Warning & Notice:

1.When the air compressor being replaced, the matching relay must be replaced according to the corresponding vehicle. If there is something wrong with the relay which leads the compressor to continuous operation without any break, it will burn out the electric motor or other plastic part.

2.When the air compressor being installed, the critical parts such as rubber shock pad and damping spring must be fully fixed on the stand without short installation or missing installation (The air compressor is unequipped with parts). With the anti-vibration parts of short installation or missing installation, a loud noisy instance will happen when the air compressor is working for the sake of resonance.

3.Distribution valve, shock absorber, air tank and tube connector must be checked after air compressor installed to ensure air-tightness. The lifespan of the air compressor will be shortened if the leakage exists.

4.Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.

5.A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.

6.Change the relays before installing the compressor even if it seems to still work. This is also a specification by the car manufacturer. Be sure to change the right relays. Relays look similar, that is why there is a risk to change the wrong relays.

7.Be sure to check whether the system is leakproof after repairing. The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature. Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.

*OEM Part Number:

LR023964 LR044360, LR061663,

LR045251, LR072537, LR015303,

LR061888, LR010376, LR011837,

YWB500220

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

1.We accept multiple payment methods, such as VISA, Master Card, etc..

2.Please do not use the note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

4.Payment must be received within 7 days as auction ended or order might be delayed.

We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back or exchange guarantee.

Q: How do I pay for my purchase?
A: MY store accepts VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

1. We will leave a feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.

Copyright of SCITOO-AutoParts . All rights reserved.