7.5hp Rotary Screw Air Compressor

7.5HP Rotary Screw Air Compressor Single Phase AIR End 7.5 hp Tank 120 Gallon
Description Capacity 23 @ 100  psi Sound Level DBA 63 DBA Cooling Air/Oil Weight 800 LBS Dimensional (L-W-H) 37” x 22” x 34” Operating Pressure 60-175psi Controls On/Off Dual Control Voltages 200 – 575 (Please specify) GS COMPRESSOR GSCOMPRESSOR.COM
The GS-7.5T Series Air compressor is a single stage, air cooled, oil injected rotary screw air compressor package.  The compressor package includes the rotary screw compressor, main drive motor, air and oil system, filters, oil cooler, cooling fan and controls.  The GS rotary screw compressor is designed for a continuous duty operation.  All units are fully enclosed with a cabinet for a low sound level. The Compact design requires a minimum amount of space with an extremely low noise level for .ease of placement in any facility.
General Technical Information

All Voltages Available

Wye-Delta Start for low power consumption is standard

Air inlet and particle filters are standard

Integrated cooling system

Air and Oil Lines are copper and Stainless steel braided

Separation System

Multi-Stage Ail/Oil Air separator filter system. ASME and CRN approved safety valve, Air/Oil separator reservoir tank with oil level sight glass. Easy oil drain excess.

Air Control

Certified with a CE listed electrical components.

Drive System

Integrated V-Belt system plus easy tension system.

AirEnd

German engineered high efficiency male and female rotor design

Oil injected during compression stage for lubrication and sealing

State of the art air/oil temperature sensor at discharge of compressor.

Cooler

Plate fin air cooled aluminum oil cooler which is cooled by a dedicated cooling fan.

Oversized cooling capacity allows for simple operation at high ambient temperatures.

Fan

Fan is mounted on the cooler to allow operation of compressor with side panels off.

Electric Motor

High efficiency motor meeting NEMA requirements.

Foot/Flange mounted motor frame.

TEFC ((Totally enclosed fan cooled) to protect motor providing longer life.

Special winding Coating for longer life.

IP54 insulated motor

Electric Control

Simple design and construction provides ease of repair for minimum down dime.

Drive System

International standard pulleys are used for ease of maintenance and long life.

Intake Valve

Automatic dual control optimizes the air demands of your compressed air system.

Oil Separation System

High efficiency Air and Oil separation provides less than 3 ppm carryover for clean pure air.

Filtration

All Filtration and filter media are made of space age technology to handle the atmospheric water, pressure and high temperatures to ensure clean and debris free working capacity.

Enclosures

GSI compressors come with a cold rolled steel plated enclosures.  A 250 degree varnish ensures rust resistance for a long life.

High density environmental friendly dampening materials are used to reduce noise levels from compressor.

PLC Electronic Control

Intelligent control system displays fault codes with description for ease of maintenance and short down time.

Warranty

The GS compressors come with a 5 year limited warranty

GS reserves the right to change any specifications at any time without notice.  Please contact GS for any updates or changes. All rights reserved.

Returns Accepted for this item if it's within 14 Days