425oz.in Closed Loop Stepper Motor Nema23 3Nm Servo Driver & 36V Power

This CNC kit included: 1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor 1 x Nema 23 Closed Loop Stepper Motor 3.0 Nm/424.83oz.in Encoder 1000CPR

1 x

MEAN WELL

212.4W 36VDC 5.9A 115/230VAC Enclosed Switching Power Supply

1 x 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x RV-4 AWG20 1.7m(67") Long Motor Extension Cable with GX16 Aviation Plug 1x Driver CL57T User Manual Motor Specification:
Part Number: 23HS45-4204D-E1000

Number of phase: 2

Holding Torque: 3Nm(424.83oz.in)

Rated Current/phase: 4.2A

Phase Resistance: 0.82ohms

Inductance: 3.6mH ± 20%(1KHz)

Frame Size: 57 x 57mm

Body Length: 138mm

Shaft Diameter: 8mm

Shaft Length: 21mm

D-CUT Shaft Length: 15mm

Lead Length: 300mm

Encoder Specification: Output Circuit Type: Differential type Encoder Type: Optical Incremental Encoder Resolution: 1000PPR(4000CPR) Output Signal Channels: 2 channels Supply Voltage Min: 4V Supply Voltage Max: 5V Output Current: 100mA Output High Voltage: 5V Output Low Voltage: 4.5V Output Frequency Max: 60kHZ 2-Phase Hybrid Stepper Servo Driver CL57T Power Supply Specification
Brand MEANWELL
36V DC 5.9A output
AC input voltage range: 90 ~ 132VAC
Rated power: 212.4W
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
1U low profile
Withstand 5G vibration test
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test
High operating temperature up to 70℃
Operating altitude up to 5000 meters (Note.8)
High efficiency, long life and high reliability
3 years warranty

Returns Accepted for this item if it's within 30 Days