4 Superior Trumpet Air Horn 12v Compressor

Product Information:

A full train horn system, ready to install. At the heart of this package is the intense quad trumpet air horn, drawing immediate attention. Chrome color, made entirely of metal for maximum protection against all weather conditions. This system includes a 1.6 Gallon blue air tank, 150 PSI 12 volt air compressor, pressure gauge, pressure switch, hose, fittings and mounting hardware. Ideal for all vehicles with a 12 system. A bold, loud choice.Because the compressor is integrated with the tank, the air connection and electrical wiring to the pressure switch is already done, making installation easier and faster.

 

Specification:

Trumpet

4 Superior Trumpet Air Horn 12V Compressor Tank Gauge Kit for Car Train Truck

Product Information:

A full train horn system, ready to install. At the heart of this package is the intense quad trumpet air horn, drawing immediate attention. Chrome color, made entirely of metal for maximum protection against all weather conditions. This system includes a 1.6 Gallon blue air tank, 150 PSI 12 volt air compressor, pressure gauge, pressure switch, hose, fittings and mounting hardware. Ideal for all vehicles with a 12 system. A bold, loud choice.Because the compressor is integrated with the tank, the air connection and electrical wiring to the pressure switch is already done, making installation easier and faster.

 

Specification:

Trumpet

• Trumpet Size:6.5"/9"/11.5"/13.5"*3.5" (165/230/295/350×90(dia)mm)
• Volt:DC 12V
• Current:4.0A
• Sound Level:150dB
• Color:Chrome/Silver
• Operation Air:29-116 PSI(0.2Mpa-0.8Mpa)
• Construction:Chrome plated zinc alloy

 

One-piece Tank Compressor System

• Tank Compressor Size:15"x5.5"x11.5"(380(L)×140(W)×300(H)mm)
• Volt:DC 12V
• Current:23.0A
• Color:Blue
• Max Working Pressure:150 PSI
• Tank Capacity:6L(1.6GAL)             
• Pressure Switch Setting:90 PSI on, 120 PSI off
• Duty Cycle:15%
• Flow Rate (0 PSI):1.17CFM
• Maintenance Free:Yes
• Thermal Protection:Yes
• Anti-Corrosion Coating
• Precision Welded
• Mounting Hardware Included
• Designed for any high-pressure air horns that require on-board air system
• Thermal Overload Protection (Will automatically shut off when air compressor goes over 176F and restart when it cool down to 158F)

 

Included in this kit:

• 1x Quad/4 Trumpets Train Air Horn (Chrome)
• 12 Electric Air Valve (Solenoid) with Compression Fitting
• 1x All-in-one Compressor & Tank
• 1x Pressure Switch & Pressure Gauge & Air Fiittings Pre-installed
• 1x Hose(16inch/5m)
• 1x Fuse
• 1x Necessary hardware

 

SAFETY INSTRUCTIONS:

• Do not attempt to disassemble, repair or customize this product.
• Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water.
• Avoid reaching out to touch or pick up any fallen or water submerged parts.
• Never leave this product unattended during use.
• Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods.
• Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.
• Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air.
• It is important to determine the maximum air pressure for any tool or attachment before using it.
• Air sprayer or nozzle should always be pointed away from any part of the body.
• The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.
• Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation.
• Employ equipment for eye protection during drilling operations.
• Ensure that your air system has no pressure before you begin.
• The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.

 

Installation Tips:

PLANNING YOUR INSTALLATION:

• Before beginning the installation, determine each component’s spot.
• Confirm you have the proper length of airline and wire.
• Power wire to on-board air system should be kept short.
• To power up the on-board air system, make sure you use a 12-gauge wire or thicker.

 

HORN MOUNTING:

• Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to shaking.
• Never attach the horn to any plastic or other flexible material.
• Mark the spots for the holes with the bracket and then drill.
• The mounting hardware should be used to fasten the horn.

 

AIR LINE INSTALLATION:

• On one side of the included 1/4" OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve.
• Pass the brass nut through the inlet fitting and fasten.
• Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut.
• WARNING: Avoid over tightening.

 

ON-BOARD AIR SYSTEM MOUNTING:

• Determine a dry place to mount your on-board air system. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around
• compressor and also to avoid heat from the exhaust.
• IMPORTANT: Never attach the system to any plastic or other flexible material.
• For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed.
• Avoid placing compressor near flammable liquids.
• For proper heat dissipation of the compressor never install the on-board air system upside down.
• Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the system is secured.

 

CHECK VALVE:

• The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction.
• IMPORTANT: Do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor.

 

THERMAL OVERLOAD PROTECTION:

• The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.

 

PRESSURE SWITCH RATING:

• The included pressure switch has a rating of 90 PSI ON, 120 PSI OFF. When the air pressure in the air tank is below the preset ON pressure (90 PSI), the compressor will automatically turn on and will start pumping air into the tank. When the pressure reaches the cut OFF pressure (120 PSI), the compressor will be automatically shut off.
• In this system your Pressure Switch is already wired to the air compressor. Do not modify this connection.

 

AIR PRESSURE GAUGE:

• Your system includes a 150 PSI Pressure Gauge that will measure the air pressure of the tank.
• The air pressure gauge is a sensitive part of the system, please avoid dropping, hitting or tighten it to the tank
• using a method other than the brass nut located in the back.

 

SAFETY VALVE:

• Your system comes with a safety valve designed specifically to release pressure from the air tank automatically if 150 PSI is exceeded. This will help prevent an accident in case of pressure switch failure.

 

DRAIN NUT:

• This nut helps you drain the water that can collect in the air tank after long periods of use.
• REMOVING CONDENSATION:To remove any condensation which has accumulated inside the tank, bleed the tank’s pressure until it ranges from approximately 5 PSI to 20 PSI.
• Remove the drain nut found at the tank’s bottom to drain the water from the tank. After draining the accumulated condensation, apply thread sealant to the nut’s thread and reinstall it.
• IMPORTANT: Draining the system regularly will extend the life of the air tank.

 

ELECTRICAL CONNECTION:

ON-BOARD AIR SYSTEM

• The red wire of the on-board system coming from the bottom of the tank should be connected using the provided fuse to (+) 12/volt power source.
• IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on.
• Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor.
• The black wire of the on-board system coming from the bottom of the tank should be connected to ground.
• The ground connection should be rust and paint free.
• Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch's cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant.
• IMPORTANT: Never touch fittings, connecting tubes or the air compressor with bare hands either during or shortly after use.

 

HORN (SOLENOID)

USING NEW HORN BUTTON

• Connect one of the electric valve’s wires to the positive (+) terminal of the battery, alternator, etc. This circuit should be protected using a 10A fuse (not provided).
• Connect the second electric valve wire to one of the Horn Button’s connections. The remaining connection of the Horn Button must be connected to ground.

 

USING VEHICLE’S HORN SWITCH

• First, determine the switch’s polarity. The horn of most vehicles sends a negative (-) signal which can be confirmed by connecting one of the probes from an ohm meter to the wire of the horn while connecting the other one to ground. The meter should be at zero. This proves that horn circuit is negative (-). In case the meter reads anything other than zero ohms, test for voltage between the wire of the horn and the ground. A 12-volt reading would mean a positive (+) horn circuit.
• Once you know the horn circuit’s polarity, connect any of the solenoid wires to the horn wire.
• If you have a negative horn circuit, connect the remaining solenoid wire to a constant 12-volt power source.
• If you have a positive horn circuit, connect the remaining solenoid wire to ground.

 

MAINTENANCE

• Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.
• Make sure mounting screws are regularly tightened if needed.
• Drain weekly, to avoid excessive buildup of condensation.
• Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty.
• Just remove the front cover of the filter’s housing to reach it.
• Replacement time frames depend on the operating environment and how often it is used.
• Clean dirt and dust from heat spreader and motor housing of the compressor.
• The motor of the air compressor has a maintenance-free lasting lubricant. DO NOT LUBRICATE.

 

SOLUTIONS TO COMMON ISSUES

Issue: Compressor inoperable.

• Solution 1: Check all switches to make sure they are ON.
• Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse.
• Solution 3: Allow compressor to cool off for 30-60 minutes.
• Solution 4: Check pressure switch, replace if damaged or inoperable.

 

Issue: Air horn is inaudible.

• Solution 1: Check all switches to make sure they are ON.
• Solution 2: Assure air tank is pressurized.
• Solution 3: Check the fuse; if blown, disconnect compressor from power and replace the fuse.
• Solution 4: Examine electrical connection for damage or corrosion, secure electrical connections.

 

Issue: Excessive moisture in horn.

• Solution 1: Depressurize and drain the tank.
• Solution 2: Relocate the on-board air system to a drier location.

 

Issue: Continual cutting-off of Thermal overload protection.

• Solution 1: Relocate the on-board air system to a drier, cooler location.
• Solution 2: Replace the compressor.

 

Issue: Excessive vibration or noise.

• Solution 1: Tighten system components.
• Solution 2: Replace the compressor.

 

Issue: Loss of pressure of tank when compressor is shut off.

• Solution 1: Tighten drain cock.
• Solution 2: Examine air and check valves and replace if damaged or leaking.
• Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed.

 

Issue: Compressor runs continuously and has low air flow.

• Solution 1: Decrease the frequency of use.
• Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed.
• Solution 3: Clean or replace the air filter element if it is clogged.
• Solution 4: Replace compressor.

Item SpecificsBrand :topcn-autopartsManufacturer Part Number :TOP10808001CNType :HornHorn Type :TrainFeatures :Quick ReleaseMaterial :MetalColor :BluePlacement on Vehicle :Left Right Front RearFitment Type :Direct ReplacementMounting Hardware Included :YesManufacturer Warranty :1 YearCustom Bundle :NoModified Item :NoSurface Finish :ChromeInterchange Part Number :Air HornOther Part Number :Quad/4 TrumpetsSuperseded Part Number :Truck Car SUV Train HornDB Output :150 DBMax Pressure :150PSIKit or Single Part :KitVoltage :DC 12VTrumpet Size :6.5"/9"/11.5"/13.5"*3.5"Operation Air :29-116 PSITank Compressor Size :15"x5.5"x11.5"Tank Capacity :1.6GALPressure Switch Setting :90 PSI on, 120 PSI offDuty Cycle :15%Flow Rate (0 PSI) :1.17Maintenance Free :YesThermal Protection :YesPackage Size :20"x20"x8"Gross Weight :17 lb
Shipping

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

Payment

We accept multiple payment methods

Returns

1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.

Customer Services

 Q: How do I pay for my purchase?
A: MY store accepts PayPal. 
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

Feedback

1. We will leave positive feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop Category Store Home  Ignition Coils  complete struts  Radiator Support  Wheel Hub Bearing  Wheel Adaptor  Oxygen Sensor  Towing mirrors  Fuel pump assembly  Lift supports  Starter  Key or key case  struts  CV Boot Kit  wheel lug nuts  Cylinder Piston Gasket Kit  Cylinder Head Gasket Sets  CV Axle  Door handle  Radiator  fastener  UTV & ATV Brake System Parts ▷  Brake Pads  ♢  Kevlar Carbon Brake Pads  Regulator Rectifier  blower motor fan  blower motor resistor  suspension kit ◈  suspension kits ◈  suspension cj ◈  suspension gxy ◈  suspension fu  AC Compressor  Brake system ◈  Brake Rotors ◈  Brake Pads ◈  Brake Rotors and Pads ◈  Brake Drum  Air Suspensions  Nerf Bars & Running Boards  Spark Plugs  ATV Rear Axle​  Window Switch  Mass Air Flow Sensor-MAF  Window Regulator  Alternator  Leveling Lift Kit  Fuel Injector  Coilover  Car Tools  Windshield Wiper Motor  Thermostat Housing  Radiator Coolant Tank  Fuel Tank Pipe  Valve Cover  Door Lock Actuator  Power Steering Pump  Variable Timing Solenoid (VVT)  Electric Water Pump  Timing Chain Kits  Timing Belt Kits  Water Pumps  Oil Pump  Tire Pressure Sensor  Throttle Body  Harmonic Balancer  Motorcycle Carburetor & Parts  Intake Manifold  Cooling Fan  Cooling Fan Clutch  Hydraulic Lifter&Roller Lifter  Suspension+Strut+Bearing  Head/Fog/Tail Light Assembly  HVAC  Parking sensor  Car Antenna  ABS Wheel Speed Sensor  PTO Clutch  Spoilers & Wings  Tensioners  Knock Sensor  Turbocharger  Crankshaft Position Sensor  Camshaft Position Sensor  MAP Sensor  Oil Pressure Sensor  Throttle Position Sensor  Stator  Catalytic Converter  idle air control valve  Transfer Case Shift Motor  Secondary Air Injection Pump  Running Board Motor  Consoles & Parts  Roof rack  Bumper  Steering Rack  Air Diesel Heater  Engine Mount  Glow Plug  Air Cleaner Filter Box  Cylinder Piston Kit  Jack Stands  Sun Visor  Window Visor  ATV Brake Caliper  Air Intake Hose  Cold Air Intake Kit  Horns  Steering U-Joint  Fuel Cell Tank  Height Level Sensor  Temperature Sensor  Driveshaft  Air Ride Suspension Valves  Calipers & Rotors ◈  Calipers & Rotors Pads  Ballast module  Dipstick  Removal Open Tools  Camshaft & Crankshaft  Rocker Arm  Electric Motor  LED headlight Assembly  Wheel Hub Bearing Knuckle  headlight motorcycle  Foot Rest Pedal  water Pump Impeller  Strut Mount  Splash Guards & Mud Flaps  Heater Cores  Evaporators  vehicle speed sensor  Light Bar Mount Bracket  Sensor-8  CV axle+Brake Pads/Rotors  Steering Shaft  transmission filter  snorkel air intake  CDI BOX  Spindle  Other Golf Cart Parts  Intercoolers  4 pcs wheel hub bearing  Window Weatherstrip Seal  Fender Flares  jumper cable  Tonneau Cover  Front Bumper Lip  dash cover  primary drive clutch  golf  AC Compressor Control Valve+A  Garden Water Pump  Ignition Wires  Lower Kits & Parts  Cargo Cover  Leaf Springs  Hub Caps  fog lights  winch  CV Joint Axle  Power Brake Booster  leveling kit + struts shocks  Wheel Rim  Lights ◈  Side/Cab Marker Lights ◈  Instrument Panel Lights ◈  Third Brake Lights ◈  Interior Lights ◈  Led Headlights  flywheel  Air Dryer  steering knuckle-7  Bed Step  Headlight Assembly-II  Trunk Mat  RV Awning Fabric  Trailer Hitch  Coil Springs  Brake System Parts ◈  Brake Calipers ◈  Brake Drums & Brake Shoes ◈  Brake Pads & Brake Shoes  Air Filter  Fuel Vapor Charcoal Canister  A/C Refrigerant Discharge Hose  Steering Wheel Clock Spring  Brake Dust Shield  RV Cover  Leaf Spring Shackle Kit  Mower Blades  Deck rebuild kit  truck box  Radiator Shutter  Deck Belt  OtherHot Item Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 25.21 2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob USD 18.22 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 20.03 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 19.26 Turbocharger Turbo For 2011-2015 Chevrolet Cruze LTZ Sedan 4-Door 1.4L 1364CC USD 165.90 New List Item Fits Nissan Cube 2009 - 2012 2013 2014 2X Brake Rotors 4X Ceramic Pads Front USD 92.68 Fits Ford F-250 Super Duty 1999-2004 4Wd 2X Brake Rotors 4X Ceramic Pads Front USD 184.39 Fits Ford Edge 2007-2009 Awd 2X Brake Rotors + 4X Ceramic Pads Front 54154 1258 USD 130.33 Front Rear Struts Shocks For Nissan Armada 2004 2005-2015 4WD w/ Sway Bars Kit USD 183.83 Fits Ford Fusion 2006-2012 For Mercury Milan 2006-2011 Rear Brake Rotors Pads USD 74.41 4 Superior Trumpet Air Horn 12V Compressor Tank Gauge Kit for Car Train Truck

Product Information:

A full train horn system, ready to install. At the heart of this package is the intense quad trumpet air horn, drawing immediate attention. Chrome color, made entirely of metal for maximum protection against all weather conditions. This system includes a 1.6 Gallon blue air tank, 150 PSI 12 volt air compressor, pressure gauge, pressure switch, hose, fittings and mounting hardware. Ideal for all vehicles with a 12 system. A bold, loud choice.Because the compressor is integrated with the tank, the air connection and electrical wiring to the pressure switch is already done, making installation easier and faster.

 

Specification:

Trumpet

• Trumpet Size:6.5"/9"/11.5"/13.5"*3.5" (165/230/295/350×90(dia)mm)
• Volt:DC 12V
• Current:4.0A
• Sound Level:150dB
• Color:Chrome/Silver
• Operation Air:29-116 PSI(0.2Mpa-0.8Mpa)
• Construction:Chrome plated zinc alloy

 

One-piece Tank Compressor System

• Tank Compressor Size:15"x5.5"x11.5"(380(L)×140(W)×300(H)mm)
• Volt:DC 12V
• Current:23.0A
• Color:Blue
• Max Working Pressure:150 PSI
• Tank Capacity:6L(1.6GAL)             
• Pressure Switch Setting:90 PSI on, 120 PSI off
• Duty Cycle:15%
• Flow Rate (0 PSI):1.17CFM
• Maintenance Free:Yes
• Thermal Protection:Yes
• Anti-Corrosion Coating
• Precision Welded
• Mounting Hardware Included
• Designed for any high-pressure air horns that require on-board air system
• Thermal Overload Protection (Will automatically shut off when air compressor goes over 176F and restart when it cool down to 158F)

 

Included in this kit:

• 1x Quad/4 Trumpets Train Air Horn (Chrome)
• 12 Electric Air Valve (Solenoid) with Compression Fitting
• 1x All-in-one Compressor & Tank
• 1x Pressure Switch & Pressure Gauge & Air Fiittings Pre-installed
• 1x Hose(16inch/5m)
• 1x Fuse
• 1x Necessary hardware

 

SAFETY INSTRUCTIONS:

• Do not attempt to disassemble, repair or customize this product.
• Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water.
• Avoid reaching out to touch or pick up any fallen or water submerged parts.
• Never leave this product unattended during use.
• Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods.
• Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.
• Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air.
• It is important to determine the maximum air pressure for any tool or attachment before using it.
• Air sprayer or nozzle should always be pointed away from any part of the body.
• The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.
• Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation.
• Employ equipment for eye protection during drilling operations.
• Ensure that your air system has no pressure before you begin.
• The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.

 

Installation Tips:

PLANNING YOUR INSTALLATION:

• Before beginning the installation, determine each component’s spot.
• Confirm you have the proper length of airline and wire.
• Power wire to on-board air system should be kept short.
• To power up the on-board air system, make sure you use a 12-gauge wire or thicker.

 

HORN MOUNTING:

• Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to shaking.
• Never attach the horn to any plastic or other flexible material.
• Mark the spots for the holes with the bracket and then drill.
• The mounting hardware should be used to fasten the horn.

 

AIR LINE INSTALLATION:

• On one side of the included 1/4" OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve.
• Pass the brass nut through the inlet fitting and fasten.
• Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut.
• WARNING: Avoid over tightening.

 

ON-BOARD AIR SYSTEM MOUNTING:

• Determine a dry place to mount your on-board air system. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around
• compressor and also to avoid heat from the exhaust.
• IMPORTANT: Never attach the system to any plastic or other flexible material.
• For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed.
• Avoid placing compressor near flammable liquids.
• For proper heat dissipation of the compressor never install the on-board air system upside down.
• Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the system is secured.

 

CHECK VALVE:

• The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction.
• IMPORTANT: Do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor.

 

THERMAL OVERLOAD PROTECTION:

• The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.

 

PRESSURE SWITCH RATING:

• The included pressure switch has a rating of 90 PSI ON, 120 PSI OFF. When the air pressure in the air tank is below the preset ON pressure (90 PSI), the compressor will automatically turn on and will start pumping air into the tank. When the pressure reaches the cut OFF pressure (120 PSI), the compressor will be automatically shut off.
• In this system your Pressure Switch is already wired to the air compressor. Do not modify this connection.

 

AIR PRESSURE GAUGE:

• Your system includes a 150 PSI Pressure Gauge that will measure the air pressure of the tank.
• The air pressure gauge is a sensitive part of the system, please avoid dropping, hitting or tighten it to the tank
• using a method other than the brass nut located in the back.

 

SAFETY VALVE:

• Your system comes with a safety valve designed specifically to release pressure from the air tank automatically if 150 PSI is exceeded. This will help prevent an accident in case of pressure switch failure.

 

DRAIN NUT:

• This nut helps you drain the water that can collect in the air tank after long periods of use.
• REMOVING CONDENSATION:To remove any condensation which has accumulated inside the tank, bleed the tank’s pressure until it ranges from approximately 5 PSI to 20 PSI.
• Remove the drain nut found at the tank’s bottom to drain the water from the tank. After draining the accumulated condensation, apply thread sealant to the nut’s thread and reinstall it.
• IMPORTANT: Draining the system regularly will extend the life of the air tank.

 

ELECTRICAL CONNECTION:

ON-BOARD AIR SYSTEM

• The red wire of the on-board system coming from the bottom of the tank should be connected using the provided fuse to (+) 12/volt power source.
• IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on.
• Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor.
• The black wire of the on-board system coming from the bottom of the tank should be connected to ground.
• The ground connection should be rust and paint free.
• Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch's cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant.
• IMPORTANT: Never touch fittings, connecting tubes or the air compressor with bare hands either during or shortly after use.

 

HORN (SOLENOID)

USING NEW HORN BUTTON

• Connect one of the electric valve’s wires to the positive (+) terminal of the battery, alternator, etc. This circuit should be protected using a 10A fuse (not provided).
• Connect the second electric valve wire to one of the Horn Button’s connections. The remaining connection of the Horn Button must be connected to ground.

 

USING VEHICLE’S HORN SWITCH

• First, determine the switch’s polarity. The horn of most vehicles sends a negative (-) signal which can be confirmed by connecting one of the probes from an ohm meter to the wire of the horn while connecting the other one to ground. The meter should be at zero. This proves that horn circuit is negative (-). In case the meter reads anything other than zero ohms, test for voltage between the wire of the horn and the ground. A 12-volt reading would mean a positive (+) horn circuit.
• Once you know the horn circuit’s polarity, connect any of the solenoid wires to the horn wire.
• If you have a negative horn circuit, connect the remaining solenoid wire to a constant 12-volt power source.
• If you have a positive horn circuit, connect the remaining solenoid wire to ground.

 

MAINTENANCE

• Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.
• Make sure mounting screws are regularly tightened if needed.
• Drain weekly, to avoid excessive buildup of condensation.
• Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty.
• Just remove the front cover of the filter’s housing to reach it.
• Replacement time frames depend on the operating environment and how often it is used.
• Clean dirt and dust from heat spreader and motor housing of the compressor.
• The motor of the air compressor has a maintenance-free lasting lubricant. DO NOT LUBRICATE.

 

SOLUTIONS TO COMMON ISSUES

Issue: Compressor inoperable.

• Solution 1: Check all switches to make sure they are ON.
• Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse.
• Solution 3: Allow compressor to cool off for 30-60 minutes.
• Solution 4: Check pressure switch, replace if damaged or inoperable.

 

Issue: Air horn is inaudible.

• Solution 1: Check all switches to make sure they are ON.
• Solution 2: Assure air tank is pressurized.
• Solution 3: Check the fuse; if blown, disconnect compressor from power and replace the fuse.
• Solution 4: Examine electrical connection for damage or corrosion, secure electrical connections.

 

Issue: Excessive moisture in horn.

• Solution 1: Depressurize and drain the tank.
• Solution 2: Relocate the on-board air system to a drier location.

 

Issue: Continual cutting-off of Thermal overload protection.

• Solution 1: Relocate the on-board air system to a drier, cooler location.
• Solution 2: Replace the compressor.

 

Issue: Excessive vibration or noise.

• Solution 1: Tighten system components.
• Solution 2: Replace the compressor.

 

Issue: Loss of pressure of tank when compressor is shut off.

• Solution 1: Tighten drain cock.
• Solution 2: Examine air and check valves and replace if damaged or leaking.
• Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed.

 

Issue: Compressor runs continuously and has low air flow.

• Solution 1: Decrease the frequency of use.
• Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed.
• Solution 3: Clean or replace the air filter element if it is clogged.
• Solution 4: Replace compressor.

Item SpecificsBrand :topcn-autopartsManufacturer Part Number :TOP10808001CNType :HornHorn Type :TrainFeatures :Quick ReleaseMaterial :MetalColor :BluePlacement on Vehicle :Left Right Front RearFitment Type :Direct ReplacementMounting Hardware Included :YesManufacturer Warranty :1 YearCustom Bundle :NoModified Item :NoSurface Finish :ChromeInterchange Part Number :Air HornOther Part Number :Quad/4 TrumpetsSuperseded Part Number :Truck Car SUV Train HornDB Output :150 DBMax Pressure :150PSIKit or Single Part :KitVoltage :DC 12VTrumpet Size :6.5"/9"/11.5"/13.5"*3.5"Operation Air :29-116 PSITank Compressor Size :15"x5.5"x11.5"Tank Capacity :1.6GALPressure Switch Setting :90 PSI on, 120 PSI offDuty Cycle :15%Flow Rate (0 PSI) :1.17Maintenance Free :YesThermal Protection :YesPackage Size :20"x20"x8"Gross Weight :17 lb

ShippingPaymentReturnsCustomer ServicesFeedback

1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

We accept multiple payment methods

1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.

 Q: How do I pay for my purchase?
A: MY store accepts PayPal. 
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

1. We will leave positive feedback once we get your payment. 
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

Copyright of Topcn-autoparts. All rights reserved.