35X20mm Boron Carbide Nozzle Sandblasting Accessories 6mm Nozzle

35X20mm Boron Carbide Nozzle Sandblasting Accessories 6mm Nozzle Sandblasti F9Q6
Suitable for box-type manual sandblasting machine and box-type automatic sandblasting machine.
It can be used for sand glass, sandblasting, surface polishing, mechanical parts.
When the mixture leaves of the hose, the nozzle accelerates the air and abrasive.
The taper and length of the nozzle inlet and outlet determine the pattern and speed of the abrasive leaving the nozzle.
The composition of the lining material determines wear resistance.
Specially designed for surface cleaning, descaling and glass, aluminum and other decorative surfaces, used for sandblasting and carving.
Inner diameter of boron carbide nozzle: 6mm
Operation:
1. The operator inserts the nozzle gasket into the contractor's threaded nozzle holder and screw it into the nozzle, turning it by hand until it rests firmly on the gasket.
2. After all relevant equipment is properly assembled and tested, the operator points the nozzle to the surface to be cleaned and presses the remote control handle to spraying.
3. The operator holds the nozzle 18 to 36 inches from the surface and moves the nozzle smoothly at a rate that produces the cleanliness. Each channel should overlap slightly.
4. the orifice exceeds original size by 1/16 inch, the operator must replace the nozzle.
Colour: Silver
Material: Aluminum + Boron Carbide
Size: 35 x 20 x 6mm
Package Contents:
1 x Sandblasting head
1 x boron carbide nozzle

Returns Accepted for this item if it's within 30 Days