230v 5 Hp Scuba Compressor

230V 5.5 Hp Scuba Compressor Air Cooling Used for Diving Bottle Filling 9 CFM Charging Rate: 250L/min; 9cfm Suction pressure: atmosphere Working pressure: 30MPa/ 300bar/ 4500psi Max Working pressure: 33MPa/ 330bar/ 4950psi Media: air No.of stage and cylinder: 3 Electric motor: 5.5kw/7.5hp, 380v/50hz, 220v/60hz Cooling: air cooled Driven: belt driven by electric motor Shout down：Automatic stop by pressure switch Pressure indicate：Gauge Protection：Safety valve in internal and final stage Filtration：Oil separator and filter Moisture drain: by manual / Automatically drain (optional) Lubricant: ISO grade N100/150 SAE 40/50 synthetic reciprocate compressor oil Operation Temperature: 5-40℃ environment temperature Dimension：39*21.6*25.5 inch Weight：330 lbs Noise：Less than 83 dB(A) Discharge port: 2 This series are high pressure air compressor. It compresses atmosphere air go to pressure 20/30Mpa, 3000/4500psi, after be purified and separated by the filter and separator. It discharges clean air accords to GB18435-2001 breathing air standard. It is widely be used for breathing of diving and firefighting; paintball PCP shooting and other high pressure filed industries by its reliability, durability and portability ￭ Check the electric voltage in nameplate is same as your local electric supply ￭ Check the lubricate oil has been put in before running ￭ Increase rated pressure setting is forbidden ￭ There is potential danger of pipe burst or connect fitting blow off under high pressure,  please avoid body too near compressor when it running ￭ if there are no auto stop function, don't leave compressor until it reach rated pressure and shut down it by manual Notice: 1. The bottle filling of the air compressor must be greater than the pressure of the gas cylinder to fill the bottle! 【Air Compressor Pressure>Cylinder Pressure】 2. Suggestion for bottle filling: ≤ 12 L 3. Use of gas cylinder: Fire fighting, diving breathing ; Bottle filling experiment 4. Recommended operating time of the machine (machine operating load range): Within 1 hour 5. Estimated filling time: Recommendations for filling 12L gas cylinders: 1) The cylinder pressure is 200bar, and the estimated time is 12 minutes 2) The cylinder pressure is 300bar, and the estimated time is 18 minutes On May 31, 2023 at 05:50:53 PDT, seller added the following information:

Returns Accepted for this item if it's within 30 Days