4-Trumpet Train Air Horn 150dB+ Air System Kit 150 psi For Truck Car
Metal 12VUSD $88.97
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Store category
You may also like
4-Trumpet Train Air Horn 150dB+ Air System Kit 150 psi For Truck Car Metal 12V
Product Description Package Includes 1 x 4-trumpet air train horn 1 x compressor 1 x hose 1 x fuse 1 x sealing tape Necessary hardware included Description: This compressor comes with built-in 0-150 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80°C and restart when it gets back down to 70 °C. This powerful quad trumpet air horn produces a loud roaring sound. Made entirely of metal for maximum protection against all weather conditions. Installation Tips: Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles. Then tightly screw up it with the connector of compressor and horn. HOW TO USE: 1. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. 2. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET. Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced. 3. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too. 4. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. 5. Install new receiver drier or accumulator and new orifice tube or expansion valve. 6. Evacuate the A/C system for a minimum of one hour. 7. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system. 8. Start engine whit A/C controls on MAX AIR with door and windows open. 9. Add the remaining charge of refrigerant as called for by the manufacture. Note: Keep away from high temperature and moisture. SHIPPING AND PAYMENT RETURN POLICY 1 YEAR WARRANTY FEEDBACK WARNING SHIPPING AND PAYMENT Orders placed on Saturday or Sundays should be processed and shipped on Monday. Hope you can understand.
We ship all the packages within 1-2 business days. Our shipment arrive your address will take around 2-10 business days.
If you didn't received packages in 15 business days, please contact us freely, and we will check and solve it. Please purchase and pay for the item through Pricetronic auction, and do not manually send us a PayPal payment. RETURN POLICY 60-day money back guarantee
We offer a 6-month warranty for most of our products that starts on the original purchase date.
If you are not satisfied with our product, most items can be returned in their new/original/unworn condition within 60 days.
We will offer a refund or exchange (Shipping and handling fees are not refundable). A 15% restocking fee ($10 minimum) may be applicable. Items that have been worn, misused, abused, damaged, and/or altered beyond warranty coverage and period will not be refunded or exchanged. 1 YEAR WARRANTY This item have 1-year warranty. In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free. We only warranty cost of item parts. Any installation or other fees are non-refundable. Note: Any modifying the item of any kind without contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. You can contact us by Pricetronic message to get the full text of the written warranty. FEEDBACK Our goal is to earn a 5-star rating with every purchase!
We automatically leave feedback for all our buyers at the time payment is received. When you receive your order, please take a moment to leave us positive feedback at Pricetronic. If you are not satisfied, please let us know before leaving feedback! Send us a message through Pricetronic and we'll do whatever it takes to earn your satisfaction! WARNING This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to California goverment website, you can search California P65Warnings.
You may also like
4-Trumpet Train Air Horn 150dB+ Air System Kit 150 psi For Truck Car Metal 12V
Product Description Package Includes 1 x 4-trumpet air train horn 1 x compressor 1 x hose 1 x fuse 1 x sealing tape Necessary hardware included Description: This compressor comes with built-in 0-150 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80°C and restart when it gets back down to 70 °C. This powerful quad trumpet air horn produces a loud roaring sound. Made entirely of metal for maximum protection against all weather conditions. Installation Tips: Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles. Then tightly screw up it with the connector of compressor and horn. HOW TO USE: 1. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve. 2. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET. Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced. 3. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too. 4. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated. 5. Install new receiver drier or accumulator and new orifice tube or expansion valve. 6. Evacuate the A/C system for a minimum of one hour. 7. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system. 8. Start engine whit A/C controls on MAX AIR with door and windows open. 9. Add the remaining charge of refrigerant as called for by the manufacture. Note: Keep away from high temperature and moisture. SHIPPING AND PAYMENT RETURN POLICY 1 YEAR WARRANTY FEEDBACK WARNING SHIPPING AND PAYMENT Orders placed on Saturday or Sundays should be processed and shipped on Monday. Hope you can understand.
We ship all the packages within 1-2 business days. Our shipment arrive your address will take around 2-10 business days.
If you didn't received packages in 15 business days, please contact us freely, and we will check and solve it. Please purchase and pay for the item through Pricetronic auction, and do not manually send us a PayPal payment. RETURN POLICY 60-day money back guarantee
We offer a 6-month warranty for most of our products that starts on the original purchase date.
If you are not satisfied with our product, most items can be returned in their new/original/unworn condition within 60 days.
We will offer a refund or exchange (Shipping and handling fees are not refundable). A 15% restocking fee ($10 minimum) may be applicable. Items that have been worn, misused, abused, damaged, and/or altered beyond warranty coverage and period will not be refunded or exchanged. 1 YEAR WARRANTY This item have 1-year warranty. In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free. We only warranty cost of item parts. Any installation or other fees are non-refundable. Note: Any modifying the item of any kind without contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation. You can contact us by Pricetronic message to get the full text of the written warranty. FEEDBACK Our goal is to earn a 5-star rating with every purchase!
We automatically leave feedback for all our buyers at the time payment is received. When you receive your order, please take a moment to leave us positive feedback at Pricetronic. If you are not satisfied, please let us know before leaving feedback! Send us a message through Pricetronic and we'll do whatever it takes to earn your satisfaction! WARNING This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to California goverment website, you can search California P65Warnings.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
