1 hp 115 V 750W AC industrial servo motor & Driver 10 NM torque 300-4,500

1 HP 750 Watt Computer Controlled Servo Motor. New 2022 design with external rotary speed control. This Face Mount Version comes with M8 X 1.25 stainless button head mounting screws. If you prefer flush fit, ask about ordering it machined to fit M6 - 1.0 flush fit screws before you order. Sold with a custom built matching control unit . Speed is programmable for any range between 300 to 4,000 RPM See images for measurements. Note: the maximum distance between control unit and motor is 30" inches. Runs on typical 110 to 120 volt AC household power supply's Includes: A complete servo motor as seen in images. A stand alone and programmable custom built servo motor driver with thermal overload protection. A custom built external rotary speed control switch assembly as seen in images. In stock and ready to ship. Whats in the box: One 750 watt (1 HP) servo motor One customized servo motor controller with a thermal overload system.. One external rotary speed control switch. You will not be able to dissemble the speed control switch so tell me if you plan to change it. Motor programming  + spindle speeds and Reverse: The motor speed can be programmed to operate in any range chosen by the user. Between 300 and 4,500 RPM's. The full range of speed (RPM's) can also be controlled with just the speed control knob. Speed control programming only requires a few easy steps. Reverse is simple, just hold the yellow button for a few seconds. Programming includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below). Slowest speed achievable: Motor 400 RPM. (Some will run slower). Highest speed: 4,500 RPM . Soft start is programmable and will be set as soft as possible when you receive this motor. This program is very effective in reducing drive belt wear etc. Braking strength is also programmable and will be set as low as possible. Personally I wish I could set it lower. Self diagnostics with fault code chart. Safe turn on system where the speed control knob must be in the full counter clockwise (stop) position when turned on. When turned on the self diagnostic system checks for faults and will not allow the motor to turn on until the speed control knob is turned all the way to stop first. Use at your own risk. Our liability is limited to the purchase price of this item. Motor Specifications: Watt:           750  ( 1.0057665666 HP) Voltage:      110V HZ:             60 Torque:      10 N.M. RPM:         3 00 to 4,500 RPM  in 100 RPM increments. Note: Manufacturer recommended 500 to 4,000 RPMs My personal testing results: This motor runs best between 300 and 4,500 RPMs. This listing is for what is seen in the primary image. It will include printed programming instructions. Sh ipping: Due to weight it is best to ship USPS priority large flat rate box and to USA only. $4.00 will be added to the order to cover insurance Returns: This item will be in strict compliance with the Pricetronic returns policy's applied to this item when it was listed. Buyer has 14 days to file an Pricetronic return request. Buyer pays return shipping. All items shipped must be returned in new unused and undamaged condition or no refund will be issued. Limited 30 to 60 day parts warranty. Labor is buyers responsibility: See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty starts on the day Pricetronic records the system as paid and not the date the item is actually received .
Servo Motor. - I will exchange a defective servo motor for up to 60 days. Buyer must return the motor + the
control unit + the speed control switch for inspection and testing. Additionally original packaging such as
Styrofoam package inserts must be used to return these parts.
Computer control unit. - I will exchange a defective control unit PCB for up to 30 days.
Buyer must contact seller and discuss failure + fault codes. Seller will provide possible fix versus returning for
warranty repair. Note: Cutting too much material will result in a jam. This may damage the main board. This is abuse and it is not warranty. This damage is obvious. If you return a control unit and are honest about jamming it, we will fix it for you one time for a flat fee of $35 including shipping it back to you. You pay to ship it to us. Timing belt and small parts are not covered. Customer alterations and machine work are not covered and may void the above warranty. After warranty support:
There is nothing worse then having an expensive item break 2 days after the warranty expires. Please contact me
As long as there is no abuse, I will offer a solution. This often includes parts at cost and free installation. That
is as long as you communicate and pay shipping both ways.
Yes, I keep control boards in stock for this reason. I also keep motors, belts and
every part used to build these in stock. Just contact me and we will have you up and running within days, not 6 months
waiting for parts from China. Ask lots of questions before ordering: Especially about intended use. That way we can advise if this motor is a good fit Do not worry about missing this item and thus buying it and than changing your mind after the fact. If you miss it, I will build more within a day or two.

Returns Accepted for this item if it's within 14 Days