1.75L Air Pneumatic Vacuum Auto Brake Clutch Bleeder Bleeding Fluid

1L Vacuum Brake Fluid Bleeder
1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation. Used for flushing and refilling the entire brake system with this brake fluid bleeder. Hose Length 1-1/12 ft.
1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation.
Pneumatic Brake Fluid Bleeder Tool Kit with 4 Master Cylinder Adapters
90-120 PSI Air Pressure for Auto Car Truck Motorcycle Use
Widely suit for car truck motorcycle pickup and most vehicles
Used for flushing and refilling the entire brake system with this brake fluid bleeder. Refill bottle can be held on the mouth of vehicle's brake fluid reservoir by the long screw.
Clutch bleeder with hanging hook and locking trigger can hands free operation
Specification:
Hose Length 1-1/12 ft.
Air flow 180 ltr/min (=6.4 cu.ft./min) at 90-120 psi, Adapter Sizes: 21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm,
Please note:
Use only DOT certified brake fluid.
Please wear gloves and goggles when use.
If the brake bleeder screw is not sealed well, the air will go into the transparent hose, and you will see bubbles. There are three sizes of brake bleeder screw adapters, please choose the most appropriate size adapter. Grease the brake bleeder screw if it cannot be completely sealed when use.
How To Use:
1. Fill the new oil filler bottle with new oil and close the valve on the screw. Choose a right cylinder adapter to screw on the long screw of new oil filler bottle, and stuck it on the brake fluid reservoir, then open the valve.
2. Connect the vacuum pump (not included) to the waste oil bottle, and connect the black cone nipple to the vehicle bleed valve. Hook the waste oil bottle to the engine cover and use the trigger locker to hookup the trigger.
3. Open the vacuum pump to 90-120PSI for 4-5 mins, until the fresh transparent oil is sucked out from the brake bleed valve (you can observe from the transparent hose), then close the vacuum pump and brake bleed valve
4.Repeat this process on each wheel, then check the pressure of the pedal
ADAPETER SIZES
21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm
4 MASTER CYLINDER ADAPTERS
Made of strong plastic material.
1.25" -1.60" (32 to 41mm)
1.10" -1.45" (28 to 37mm)
0.95" -1.25" (24 to 32mm)
0.80" -1.20" (21 to 30mm)
PACKAGE INCLUDED
1 x 1 L Brake and Clutch Bleeder, 1 x 0.8L Refill Container, 1 x BSP Connector, 2x Air quick plugs, 4 x Master Cylinder Reservoir Adapters(21 to 30mm, 24 to 32mm, 28 to 37mm, 32 to 41mm). Capacity 1L 135 ML 3L 350ML 1L
Recommend to you
6Pcs Set Tire Spoon Lever Iron Tool Set Motorcycle Bike Tire Changer Kits w/Case 19.99 USD
Free shipping
Valve Spring Compressor C-Clamp Service Kit Automotive Tool Motorcycle ATV Car 20.5 USD
Free shipping
Fit for GM Chevy Ford Dodge Torsion Bar Unloading Tool Key Removal Car Truck 25.93 USD
Free shipping
6Pcs Front End Service Kit Pitman Arm Puller Ball Joint Tie Rod Removal Tool Set 49.39 USD
Free shipping
3 Pack Heavy Duty Coil Spring Compressor Strut Remover Installer Tool Suspension 45.99 USD
Free shipping
Engine Brake Cylinder 2''-7'' Hone Flex Shaft Bore Honing Tool Flexible 3" Blade 21.99 USD
Free shipping
52pc Bearing Seal Ring Driver Tool Kit Bushing Bearing Hydraulic Press 18-65mm 63.24 USD
Free shipping
Camshaft Engine Timing Locking Tool fit for BMW Mini Cooper Clubman N13 N18 B16A 41.39 USD
Free shipping
24PCS Disc Brake Caliper Wind Back Tool Piston Pad Compressor Rewind Tool Set US 24.15 USD
Free shipping
Disc Brake Caliper Wind Back Tool Kit Front Rear Brake Piston Compression Tools 24.14 USD
Free shipping
2Pack Heavy Duty Coil Spring Compressor Strut Remover Installer Tool Suspension 40.24 USD
Free shipping
Water Pump Sprocket Retainer Holding Tool Timing Chain Drive for GM 2.2L/2.4L 14.94 USD
Free shipping

Returns Accepted for this item if it's within 30 Days